Chapter 6. Sequencer (Playback)
Supplementary function for TAP and
V-LINK
Tap Reset Time: OFF,
This function automatically returns the pattern to the beginning if the set time interval elapses without the pad being hit again. This is the time interval that resets the pattern being used. If it is set to “OFF,” this function will be disabled.
You can have the velocity of the pattern being played change according to the force with which the pad is tapped (Pad Pattern Velocity). Refer to p. 35.
Naming a Pattern [F5 (NAME)]
Each pattern can be named (up to 12 characters).
1.Press [PATTERN] - [F3 (FUNC)] - [F5 (NAME)].
[PATTERN] lights, and the “PATTERN NAME” screen appears.
2.Press [CURSOR (left/right)] to move the cursor to the character to be changed.
3.Use [VALUE],
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at cursor position is replaced by a blank space.
[F4 (CHAR)]
Character at the cursor position changes between upper case/lowercase alphabet, or numbers and symbols.
Starting and Stopping the Metronome (Click) On/Off
1.Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2.Press [F5] to turn the click ON and OFF.
3.Press [EXIT] to return to the “DRUM KIT” screen.
You can also turn the click on/off by holding down
[SHIFT] and pressing [TEMPO].
Using a Indicator as a Click
You can use the [TEMPO] indicator as a click.
1.Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2.Press [F4] to turn the [TEMPO] indicator flashing (ON) or going off (OFF).
3.Press [EXIT] to return to the “DRUM KIT” screen.
6 | [PLAY] |
Chapter | |
|
|
59