LDVR Series Direct Vent Gas Fireplace
36LDVR
1. Place rear log (B158) on rear |
|
| Rear |
|
bracket (ensure log is seated prop- |
|
| (B158) |
|
erly to the bracket and located to |
|
|
|
|
the two pins), so it will not move |
|
|
|
|
from side to side and is firmly posi- |
|
|
|
|
tioned on the bracket. |
|
|
|
|
2. Place front left log (B160). Use the |
|
|
|
|
log’s bottom hole to locate it onto |
|
|
|
|
the front support and just rest on |
|
|
|
|
top of the rear log. |
|
|
|
|
3. Place front right log (B159). Use |
|
|
|
|
the log’s bottom hole to locate it |
|
|
|
|
onto the front support and the top |
|
|
|
|
hole to the knob onto the rear log. |
|
|
|
|
4. Place front center log (B161) on |
|
|
|
|
top of the two small shelves at the |
|
|
|
|
front log support and between the |
|
|
|
|
left and right logs. |
|
|
|
|
5. Place ember material on top of |
| Front Left |
| Front Right |
|
| (B159) | ||
burner. Scatter the ember mate- |
| (B160) | Front Center | |
|
| |||
rial over the tiles on the front area | LG481 |
| (B161 ) |
|
|
|
|
| |
of the burner housing. (Fig. 49) | Fig. 42 | Correct log placement for 36LDVR. |
| |
Do not pack the ember material. |
|
| Do not place any of the lava rock mate- | |
Separate it when unpacked and keep it in a fluffy and | rial on the burner housing assembly. | |
loose condition for a more realistic ember effect. | ||
|
6.Scatter the lava rock material around the firebox base.
39LDVR
1.Place rear log (BC14) on rear bracket (ensure log is centered and seated properly to the log support).
2.Place front left log (BC15). Use log’s bottom hole to locate it onto the front support and just rest on top of the rear log.
3.Place front right log (BC16). Use log’s bottom hole to locate it onto the front support and the top hole to the knob on the rear log.
4.Place front center log (B138) on top of the two small shelves at the front log support, and between the left and right logs.
5.Place ember material on top of burner. Scatter the ember material over the tiles on the front area of the burner housing. (Fig. 50) Separate it when un- packed and keep it in a fluffy and loose condition for a more realistic ember effect.
Front Left | Front Right |
(BC15) | (BC16) |
Rear (BC14)
Front Center
(B138)LG414
Fig. 43 Correct log placement for 39LDVR.
Do not place any of the lava rock material on the burner housing assembly.
10007317 | 25 |