MAIN BURNER LIGHTING
To light the Main Burners always start with the Left Hand Burner first. Turn the Left hand Control Knob to HI and Depress the Igniter Button. Once this burner has lit, simply turn the next Control Knob to the right to high and this burner will light, repeat this step for the remaining burners. The Ignition button will only be used to light the first Left Hand Burner.
1.Always open the lid when lighting the burners.
2.Turn the left burner to HI. Press and hold igniter button until the burner lights. Simply turn the next Burner to the left to HI and the next burner will light. Repeat this step for the remaining burners.
3.If the burner does not immediately light, turn the valve to OFF. Wait 5 minutes then repeat lighting procedures.
NOTE: Always light the burners from Left to Right using the Electronic Ignition to lit the Left hand Burner only. Once all burners are lit you may turn any of the burners OFF to achieve the desired temperature.
LIGHTING INSTRUCTIONS
1)Read operating instructions BEFORE LIGHTING BARBECUE.
2)Always open the lid before lighting.
3)Main Burners: Push and turn Control Knob to HIGH. Push and hold IGNITOR button until burner lights.
4)If ignition does not take place immediately. Turn valve to OFF, Wait five (5) minutes and repeat lighting procedure.
5)To shut OFF: turn gas supply valve to OFF.
Allow gas line to burn out and turn Control Knob OFF.
CAUTION: FOR OUTDOOR USE ONLY
HI
M |
|
|
E |
|
|
D |
| |
W | O | L |
| ||
|
| |
Turn the Left hand Control Knob to HI.
Depress The Ignitor Button until the Burner Lights.
WOL
HI
M
E
D
MANUAL BURNER LIGHTING MAIN BURNER
See your local dealer for service if your grill igniter is not functioning.
1.Remove the cooking grates and the flame tamers that are over each burner.
2.Turn the burner you are lighting to high / light and place a long match near the side gas ports of the burner.
3. If the burner does not immediately light, turn the valve to OFF. | Wait 5 minutes then repeat lighting |
procedures. |
|
REAR BURNER LIGHTING (If equipped)
1. To Light the Rear Burner, Depress the Ignition Button and then turn the Rear Burner Control Knob to HI.
HI
M
E
D
2.If the burner does not immediately light, turn Control Knob to OFF. Wait 5 minutes then repeat lighting procedures.
WOL
HI
M
E
D
W | O | L |
| ||
|
|
Turn the Rear Burner Control Knob to HI.
Depress The Ignitor Button until the Burner lights.
15