Jackson 700BI Series, 700 Series, 850BI Series Food Safety Tips and Techniques, Rotisserie Cooking

Page 20

FOOD SAFETY TIPS AND TECHNIQUES

We want to enjoy healthy and safe grill cooking, so here are some tips for basic barbecue hygiene:

Bacteria are living organisms that grow and multiply rapidly in warm moist foods. Marinate meat in the refrigerator and take it out one half hour before grilling, if you want to grill your prepared meat at room temperature.

A marinade should never be saved for a later day. If you want to use this marinade to serve with your meat please bring the marinade top a boil before using.

Professional grilling requires HIGH heat to brown and sear the meat to seal in the juices. Most foods will be cooked on “HI” setting through the entire cooking time. Some large cuts of meat may require the heat be turned down after initial browning to ensure the cut is cooked without burning the outside. Also foods that need to be cooked for a long time or foods that have been basted in a sugary marinade may need to be cooked slower and longer in order to stop the cut from being burnt on the outside.

Before grilling, check to be sure the drip tray is in place. Light the grill according to the lighting instructions. Turn the control knobs to “HI” and preheat the grill for 15 minutes with the lid closed. Place the food to be grilled on the cooking grids until desired doneness, adjust the heat setting if necessary. A meat thermometer is helpful in determining hoe long the food should be cooked. Cooking time is affected by shape and type of cut as well as thickness.

To achieve the juiciest meats, use a spatula instead of tongs or a fork to turn the meat, and only turn the meat once during cooking. Turn the meat just when the juices begin to bubble to the surface. Add seasoning or salt only after the cooking has been completed, add sauces only at the end of the cooking time, this will prevent the sauce from being burnt.

Trim excess fat from the meats prior to grilling, this will help prevent flare-ups. Cutting the fat at 2 inch intervals will prevent the cuts from shrinking during the grilling time.

ROTISSERIE COOKING:

NOTE: Always remove the Warming Rack before using the Rear Burner for Rotisserie Cooking.

To place the meat or poultry on the spit, slide one of the forks onto the spit and secure the Thumb screw. Then, insert the spit rod in the center of the meat or poultry, lengthwise. The food should then be centered on the spit rod and the remaining fork and secure the Thumb screw. Place the spit rod in the grill and let the heavy side fall to the bottom, set the counter balance to the top and fasten in place. Periodically check the meat to ensure the spit rod is turning smoothly while cooking. Adjust the counter balance if necessary.

The only accurate way to tell when the meat is done is to use a meat thermometer. Insert the thermometer into the center of the meat. Do not allow the thermometer to touch a bone as this will not give an accurate reading on the meat thermometer.

Remove the Cooking Grids and place a drip pan on top of the upper flavor shields and position the pan directly beneath the food on the spit rod. Depending on the flavor you desire, place liquid in the pan such as, water, juices or wine, chop up onions or add garlic, As the juices fall from the meat they will mix with the liquid and evaporate directly into the meat, this will prevent you from basting as this is a self-basting system.

Do not let the drip tray dry out.

20

Image 20
Contents Certified for Canada and U.S.A Table of Contents DO’S and DON’TSElectrical Caution SafetyFor Your Safety LP GAS Cylinder Placement SpecificationsLP GAS Cylinder QCC-1 Quick Closing CouplingOperation HandlingStorage OPD Equipped Cylinder IdentificationHose and Regulator ConnectionImportant Safety Information Leak TestInstallation Clearances and Dimensions700BI 850 BI 32.5 39.5 10.25 17.25 24.25 24 min 18.5 Min700BI ZC 34.75 41.75 10.25 17.25 24.25 19.5Assembly Side Shelf InstallationRotisserie KIT Installation If Equipped Rotisserie Kit Completed Installation Upper Flavor Shield, Cooking Grid InstallationMain Gas Line Connections for Propane Gas and Natural Gas Getting To Know Your Grill Manual Burner Lighting Main Burner Rear Burner Lighting If equippedNatural GAS Installations Operating The Rear BurnerMain Burner USE Converting from Propane Gaslp to Natural GASRear Burner Side Burner Maintenance Burner Removal for CleaningGAS Line Burner Inspection Please inspect these burners once a yearDo not let the drip tray dry out Food Safety Tips and TechniquesRotisserie Cooking Low heat or low flame when Valve turned to highExcessive flare-ups or Un-even heatParts List Part Number Part Description QuantityExploded View Jackson Grills Limited Lifetime Warranty Special message to our customers Jackson Grills Inc Jacob Road, Duncan, B.C V9L 6W4 Or Fax