JNR & WNK Assembly Instructions
Step 4: Attaching the Grill Lid (Fig. 30)
1.Attach the grill lid to the grill head bottom using the two Hinge Pins and Hinge Clips.
Step 5: Connect the Handle (Fig. 31)
1.Attach the handle to the grill lid using two ¼ - 20 x 1 ½" Hex bolts with Kep nuts. Graphite Gaskets are positioned between the end caps and grill lid as shown in fig. 31.
Use two 7/16" wrenches, one to hold the bolt head and one to tighten the nut.
Step 6: Grates, Briquettes and Cooking Grids
(Fig. 32)
1.Place the one piece Briquette Grate on the shelf edge just above the burner.
2.Carefully place the Ceramic Briquettes on the grate in the pattern shown. Use only one layer.
3.Place the two Cooking Grids above the Briquette Grate.
Before using your grill, leak test all gas line connections. And follow the lighting instruc- tions. See page 23.
Step 7: Warming Rack
1.The JNR Warming Rack rests in the notches on the top edge of the grill head bot- tom. (Fig. 33)
2.The WNK swingawayWarming Rack connects to the grill lid and the
grill head bot- tom. First, insert the right Top and Bottom Rods into their respective mounting holes on right side of
the grill lid and grill head bottom. Then slide the RACK to your left, positioning the left Top and Bottom Rods into their respective mounting holes simultane- ously. The Lower Right Rod End can then be “popped” into place by flexing it inward(Fig. . 34)
3.The SearMagic Warming Rack drops onto the top edge of the grill head bottom. the warming rack bracket is positioned be- tween the hinges of the grill head bottom inside back wall. (Fig. 35)
18