GAS Conversions

■Do not let the cord hang over the edge of a table or touch hot surfaces.

■Do not use an outdoor cooking appliance for purposes other than intended.

■When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.

■Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.

■Do not remove the ground prong or use with an adapter of 2 prongs.

■Use only extension cords with a 3 prong grounding plug rated for the power of the equipment and approved for outdoor use with a W-A marking.

NOTE: Check the circuit breaker on the back of the grill after plugging the grill into a 3-prong polarized type outdoor GFI outlet if there is a loss of electrical power to the grill. Reset the circuit breaker if the button is in the tripped position. Push in the rubber boot and button to reset.

A. Rubber boot	A. Rubber boot
B. Circuit breaker button in	B. Circuit breaker button
“set” position	in “tripped” position

3.Go to “Check and Adjust the Burners” section

NOTES:

■These instructions are for grill models that come equipped with the conversion kit for Local LP and Natural gas. For models that do not come equipped with the conversion kit: for conversion to Local LP order Regulator Part Number W10132702, or for conversion to Natural gas order LP to Natural Gas Conversion Kit Part Number W10118098. Use the conversion instructions included in the kit. See “Assistance or Service” section for information on ordering.

■The Fuel Remaining feature of the electronic grill display does not function with grills that are converted to Local LP (fixed piped) or Natural gas.

Tools and Parts forGas Conversion

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

IMPORTANT: Gas conversions must be done by a qualified installer. Before proceeding with conversion, shut off the gas supply to the appliance prior to disconnecting the electrical power.

This kit is designed for use from sea level up to 2000 ft elevation. For higher elevations contact KitchenAid at 1-800-422-1230in the U.S.A. or call 1-800-607-6777in Canada.

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Tools needed

■Phillips screwdriver

■Pipe wrench

■Adjustable wrench

■10 mm wrench

■6 mm socket and wrench or 6 mm nut driver

■10 mm socket and wrench or 10 mm nut driver

■Thin flat-blade screwdriver

■Pliers

■Pipe thread sealant certified for LP gas

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Parts supplied

■Brass connector

■Convertible regulator 4" W.C. Natural, 11" W.C. LP

■Natural gas orifices

Failure to do so can result in death, explosion, or fire.

KFRU271VSS, KFRU368VSS, KFRS365TSS, KFRU365VSS, KFRU361VSS specifications

The KitchenAid KFRU488TSS, KFRU488VSS, KFRS361TSS, KFRU368TSS, and KFRS271TSS represent a range of high-performance refrigerators designed for modern kitchens that demand style, functionality, and advanced technology. Each model is fortified with unique features that cater to various culinary needs while showcasing KitchenAid's commitment to quality and innovation.

The KFRU488TSS and KFRU488VSS are distinguished by their spacious French door design, which offers unparalleled access to fresh and frozen foods. Both models feature a generous capacity, allowing users to store large quantities of groceries effortlessly. A key highlight is the Preserva Food Care System, which uses a combination of a two-tiered cooling system and humidity-controlled crisper drawers to maintain optimal conditions for different food types. This technology extends the freshness of produce and prevents cross-contamination of odors.

The KFRS361TSS and KFRU368TSS models come equipped with the signature KitchenAid salt/pepper shakers and ice dispensers, bridging practicality with design. They boast the ExtendFresh Temperature Management System that monitors and adjusts temperatures in both fresh and frozen compartments, ensuring food retains its taste and texture. Additionally, these refrigerators feature an internal water dispenser, giving convenient access to chilled water without sacrificing space on the door.

For consumers focused on energy efficiency, the KFRS271TSS stands out with its Energy Star certification, signifying lower energy consumption without compromising performance. This model also incorporates a sleek, stainless steel finish that not only complements any kitchen aesthetic but also resists fingerprints and smudges for easy maintenance.

Another commonality among these KitchenAid models is their intuitive digital controls, which allow for precise temperature regulation and user-friendly navigation of different settings. Moreover, the LED lighting illuminates every corner of the refrigerator, making it easy to locate items.

In summary, the KitchenAid KFRU488TSS, KFRU488VSS, KFRS361TSS, KFRU368TSS, and KFRS271TSS embody a fusion of style, technology, and practicality, catering to the needs of modern households. With advanced preservation systems, energy efficiency, and user-centric features, these refrigerators exemplify KitchenAid's dedication to enhancing the culinary experience.