Installing Freestanding or Enclosed Masonry Applications
Prepare Surround
Construct surround following the clearances to combustibles and minimum height from ground. The surround must be a permanent and fixed construction.
| Freestanding |
recommended
Minimum Dimensions
A21.85 in (555 mm)
B46.26 in (1175 mm)
C18.50 in (470 mm)
Prepare a gas connection opening underneath the gas supply access position. Ensure the opening is large enough for the flexible connection to fit through.
Gas supply opening | 1.38 in (35 mm) | ||
|
|
|
|
8.27 in (210 mm)
17.91 in (455 mm)
17.91in (455 mm)
19.68in (500 mm)
10.24 in (260 mm)
12.01 in (305 mm)
3.15in
(80 mm)
Suggested size for gas connection opening
Clad Surround
Refer to the section, Guidelines for Cladding and Finishes.
Install Burner Assembly
Install burner assembly and fix in place with fasteners provided.
Place the cover on the burner when not in use and after it has cooled off.
Install Burn Media and Complete Gas Connection
This is common to all installations. Refer to these sections in the manual.
14 | Rinnai Corporation ROF4500 |