Rinnai 4500 installation manual Maintenance, Weather Protection, Visual Inspection of Flame

Page 9

Maintenance

For safe operation of the appliance it is imperative that the control compartment (pilot cover), burner and circulating air passageways are kept clean. To keep the gas orifices from getting clogged, ensure that debris is kept clear from the fire, and that the burn media is installed correctly.

The appliance should be inspected before use and at least annually by a qualified service technician. More frequent cleaning may be required.

Regular servicing is not covered by Rinnai’s warranty.

All parts of the heater can be cleaned using a soft damp cloth and mild detergent. Do not use solvents and do not attempt to clean the appliance while it is hot or operating.

For salty environments, clean regularly using water to prevent corrosion.

For black soot on stones or exhaust gas staining above the appliance, clean with water.

Verify proper operation after servicing.

Maintenance Task

Procedure

 

 

Inspect gas control assembly

Inspect components for proper operation and

 

leaks. Vacuum compartment.

Clean Pilot / Burner

Remove any surface build-upon the pilot and

 

burner assembly.

 

 

Operate appliance

Check for proper operation and visually inspect

 

the flame for signs of problems.

Weather Protection

Outdoor fires are not fully weatherproof and should not be directly exposed to rain. A weather cover has been provided with the appliance to protect the burner and burn media when not in use. Remove the cover before starting the appliance.

Visual Inspection of Flame

The Rinnai outdoor fireplace has a distinct flame pattern. This should look the same every time after an initial warm up period of approximately 30 minutes.

Abnormal flame pattern can indicate a problem with your appliance. Blocked gas orifices or burn media that have shifted can produce an abnormal flame pattern. There are some warning signs that could indicate a problem.

Unusual smell from the appliance.

Continued difficulty or delay in establishing a flame.

Flame appears either very short or very long.

Flame only burns part way across the burner.

Soot building up on the inside of the glass door.

Rinnai Corporation ROF4500

NORMAL

ABNORMAL

9

Image 9
Contents Rinnai Outdoor Fireplace Series Consumer Safety Information Table of ContentsSafety Behavior and Practices Safety Features Specifications TroubleshootingProblem Cause Solution With Fascia and Doors Dimensions DimensionsBurner Assembly Assembly SpecificationsBody Assembly Body Assembly with Glass DoorsSample Installations Installation ApplicationsOperating Instructions Before Starting the ApplianceOperating the Appliance Maintenance Task Procedure MaintenanceWeather Protection Visual Inspection of FlameBefore Installation Installation InstructionsGeneral Instructions Items included in carton ROF4500 ROF4501 ROF4502LPG Cylinder Enclosure Definition of an Outdoor Area Description Clearance Required Additional Detail ClearancesInstall Burner Assembly Installing Freestanding or Enclosed Masonry ApplicationsInstall Burn Media and Complete Gas Connection Prepare SurroundPrepare Framing Dimensions Attach Metal Lintel and Angled Clearance BracketsMetal Lintel Timber stud Install Body Assembly into Frame Install Doors if ApplicableInstall Steel Frame Attach Mounting BracketsLayer 1 Pumice Installing Burn MediaLayer 2 Single Layer of Small Quartz Layer 3 Single Layer of 14 Pieces of Large QuartzLPG Cylinder Complete Gas ConnectionGuidelines for Cladding and Finishes QTY Parts ListPanel Burner Body Item No Quantity Description ROF4501 ROF4502 Item No Quantity Description Item No Quantity Description Limited Warranty Warranty InformationConsumer Support Outdoor Fireplace 4500 FireplaceLimitation on warranties How do I get service? What is not covered?Rinnai Cheminée Extérieur Series Instructions d’installation Table des matièresDéfinitions de sécurité Dispositifs de sécurité Comportements et pratiques de sécuritéDépannage Problème Raison SolutionDimensions de brûleur DimensionsBody Dimensionsde corpsLa vue est Au loin, 0.67 17 profondément Assemblée de corps Assemblée de brûleurAssemblée de corps avec les Portes en Verre Consoles darmature en acierAccessoires facultatifs Installations témoinOpérer lappareil Avant de commencer lappareilEntretien Protection contre les intempériesInspection visuelle de flame Articles inclus dans le carton ROF4500 ROF4501 ROF4502 Avant d’installationClôture de cylindre de LPG Définition dun secteur extérieur Description Espacements Information supplémentaire Requis EspacementsInstallez le montage de brûleur Installation de lunité indépendante oumaçonnerie inclusePréparez la bordure Bordure plaquéePréparez les dimensions de encadrement Attachez le linteau en métal et les équerresLinteau en métal Ouvrez le Cabinet Dégrossi par DégrossiInstallez le montage de corps sur larmature Installez les portes si cest appropriéInstallez larmature en acier Attachez les supportsCouche 1 Ponce Installation des médias de brûlureCouche 2 À une seule couche du petit quartz Couche 3 À une seule couche de 14 morceaux de grand quartzCylindre-gas de propane liquide Accomplissez le raccordement de gazDirectives pour le revêtement et les finitions Qu’est-ce qui est couvert ? Quelle est la durée de cette couverture ?Quel est l’engagement de Rinnai ? Limitation des garanties implicites Rinnai Corporation ROF4500 Rinnai Corporation ROF4500 Rinnai’s other fine products