Rinnai 4500 Assembly Specifications, Burner Assembly, Body Assembly, Steel Frame Consoles

Assembly Specifications

Burner Assembly

The major component of the Rinnai outdoor fireplace is the burner assembly. This consists of a tube burner with an open tray filled with pumice and stones.

A SIT pilot burner is positioned along the tube burner to ensure positive lighting and is covered by a perforated guard to prevent the pumice from blocking the burner.

The gas control, pressure regulator, and spark ignition system are positioned at the right end of the tube burner.

The complete assembly is fitted with a stainless steel 404 body including a weather cover. The cover is placed over the burner for protection from wind and rain when the unit is not in use.

Body Assembly

The outer body assembly is included with the single sided (ROF4501) and see-through (ROF4502) models. One of these models must be used if installation is into a combustible enclosure.

It consists of a construction with an open front (pictured) or with open front and back (see-through).

Body Assembly with Glass Doors

The body assembly has optional tempered glass, double bi-fold doors to reduce the effects of wind or rain on the burner. The appliance can operate with the doors open or closed.

The appliance operates with the bi-fold doors with air being drawn into the combustion chamber through the lower half of the open front and expelled out the top or through the top louvers of the glass doors.

Steel Frame Consoles

Steel frame console modules are available which can reduce installation time and provide design flexibility for any outdoor area. These console modules are available as accessory items. Please refer to the steel frame modular system installation manual for additional instructions.

Base and Door Modules		Base and Spacer Modules
	1. Base Module (R2632)		1. Base Module (R2632)
1		1
		3
2			3
1	2. Door Module (R2631)	1	3. Spacer Module (R2633)

6 Rinnai Corporation ROF4500