KitchenAid KFRS271T, KFRS365T, KFRS361T, KBNS361T, KBNS271T Single-prong plug

Page 15

1.Place grill into outdoor enclosure, but leave enough room in back to connect to gas supply and electrical plug-in.

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

Failure to do so can result in death, explosion, or fire.

2.Make gas connections.

A combination of pipe fittings must be used to connect the grill to the existing gas line.

If local codes permit, use an outdoor flexible stainless steel tubing gas connector, design-certified by CSA International, to connect the grill to the rigid gas supply line. A ⁵⁄₈" diameter line is recommended. Using a wrench to tighten, connect the gas supply to the grill. Use pipe- joint compound on all non-flared male threads. Do not kink or damage the flexible connector when moving the grill.

Pipe-joint compounds suitable for use with Natural gas must be used. Do not use Teflon® tape.

A

 

 

B

D

C

 

A. Grill gas pipe

B. New CSA International approved “outdoor” flexible gas supply line

C. Rear of grill

D. To Natural gas supply

3.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A

B

A. Closed valve

B. Open valve

4.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

Plug in Grill

1.This built-in outdoor grill comes with a power transformer plug assembly for the grill lights. Plug in the single-prong plug in the receptacle on the left underside of the grill.

A

A. Single-prong plug

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug into a grounded 3-prong outdoor outlet.

3.The igniter battery is not factory installed. A 1.5 volt “D” size alkaline battery is located in the accessory box on the grill grate. Install battery at this time following the instructions in “Replacing the Igniter Battery” section.

4.Gently slide grill completely into outdoor enclosure.

5.Now go to the “Check and Adjust the Burners” section.

15

Image 15
Contents Outdoor Grills Table DES Matières Table of ContentsYour safety and the safety of others are very important Outdoor Grill SafetyPage Important Safety Instructions Style 1 Freestanding Outdoor Grills Installation RequirementsToolsand Parts Location RequirementsBuilt-In Outdoor Grills Product DimensionsCabinet Cutout Dimensions Built-In OutdoorGrill EnclosureGrill Size Cutout Width Optional Access Doors Cutout WidthElectrical Requirements Built-in Outdoor Grill Enclosure Ventilation for LP GasGas Supply Requirements Gas Connection RequirementsStyle1 Freestanding OutdoorGrills Natural Gas Style 2 -Built-In Outdoor GrillsLocal LP Gas Supply Natural Gas ConversionLP Gas Conversion Using a 20 lb LP Gas Fuel Tank Installation InstructionsStyle 1 FreestandingOutdoor GrillInstallation LP Gas Conversion Using a Local LP Gas Supply LP Gas Attach Cabinet Doors on some models Remove Packaging Material Inside the Grill Make Gas ConnectionIf Converted to Natural Gas To Install the 20 lb LP Gas Fuel TankStyle2- Built-In OutdoorGrill Installation Plug in GrillNatural Gas Use Single-prong plug If Converting to LP Gas Check and Adjust theBurnersBurner Flame Characteristics To AdjustLow Flame Adjustment Inspect the LP Gas Fuel Tank Supply Hose Using YourOutdoor GrillOutdoor Grill USE Control PanelLighting the Grill and Infrared Sear Burners UsingYourInfrared SearBurnerPrepare the Gas Supply Turn the Gas Supply OnUsingYourSideBurner Manually lighting the side burnerLighting the Side Burner Lighting the Rotisserie Burner UsingYourRotisserieOptional Accessory To UseRotisserieCooking Tips Manually Lighting the Rotisserie BurnerTrussing Poultry for the Rotisserie Using YourSmokerBox On some models and as an accessoryHood Lights CookingMethods Tips for Outdoor GrillingGrillingChart Total minutes BeefChicken Total minutes Fish and Seafood TurkeyFresh Vegetables Outdoor Grill Care Replacingthe Igniter BatteryGeneralCleaning Cleaning MethodWarming Shelf Troubleshooting Infrared Sear Burners on some modelsNothing will operate Canada Assistance or ServiceAccessories TheU.S.ACall Kitchenaid Outdoor Product WarrantyPage Votre sécurité et celle des autres est très importante Sécurité DU Gril DextérieurAvertissement Conservez CES Instructions Style 1 -Grils dextérieur autoportants Exigences DinstallationExigences demplacement OutillageetpiècesGrils dextérieur encastrés Dimensionsdu produitDimensions des ouverturesà découperdans Leplacard Enceinte du grildextérieur encastréSpécificationsélectriques Portes daccès facultatives* Largeur de louvertureTiroirs facultatifs Largeur Profondeur Méthode recommandée de mise à la terre Spécifications delalimentation en gazDétendeur Alimentation au propane par canalisation locale Puissance thermique des brûleurs en altitudeTest de pressurisation de la canalisation de gaz Alimentation par bouteille de propaneGaz naturel Conversion pour lalimentation au gaz naturelInstructions Dinstallation Style 1 -Installation du gril dextérieur autoportantInstallation de létagère latérale sur certains modèles Gaz propane Installation des portes du placard sur certains modèlesÉlimination des matériaux demballage à lintérieur du gril Raccordement au gazAlimentation au gaz naturel après conversion Installation de la bouteille de propane de 20 lbBranchement du gril Style2- Installation du gril dextérieur EncastréAlimentation au gaz naturel Conversion pour lalimentation au propane Processus de réglage Contrôle et réglagedes brûleursCaractéristiques des flammes sur les brûleurs Réglage pour le débit thermique minimumTableau de commande Utilisation DU Gril DextérieurUtilisation du grildextérieur Préparation de la source de gaz Ouvrir larrivée de gazAllumage du brûleur du gril et du brûleur à infrarouge Allumage manuel des brûleurs latéraux Utilisation dubrûleur à infrarougeUtilisation du brûleur latéral Allumage du brûleur latéralAccessoire en option Utilisation du tournebrocheUtilisation Conseils de cuisson à l’aide du tournebroche Allumage du brûleur du tournebrocheAllumage manuel du brûleur du tournebroche Troussage de la volaille pour utilisation du tournebroche Sur certains modèles ou disponible comme accessoireUtilisation du fumoir Lampes sous le capotMéthodesdecuisson Tableau decuisson au gril Minutes auTotal Bœuf Légumes frais Total PouletPoisson et fruits de mer DindeTotal Légumes frais à suivre Remplacement delapile delallumeurEntretien DU Gril Dextérieur ChangementdelampouledéclairageMéthode de nettoyage NettoyagegénéralBrûleurs À Infrarouge sur certains modèles Brûleurs EN Forme DE UAssistance OU Service AccessoiresDépannage Garantie Limitée DE UN AN Garantie DES Produits Pour Usage Extérieur KitchenaidComposer le 1-800-422-1230. Au Canada, composer le All rights reserved Tous droits réservés W10110724

KBNS271T, KFRS365T, KFRS271T, KBNS361T, KFRS361T specifications

The KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models offer a blend of performance, style, and innovative features ideal for any modern kitchen. These refrigerator models exemplify KitchenAid's commitment to quality and user-friendly design, making them popular choices for home chefs and families alike.

One standout feature across these models is their advanced cooling technologies. With the Preserva Food Care System, each of these refrigerators ensures optimal freshness for your food by utilizing two distinct cooling systems that maintain ideal humidity levels and temperatures. This minimizes the mixing of odors and prolongs the shelf life of your ingredients.

The interior layout is designed for both function and convenience. Each model includes adjustable shelves, allowing users to customize their storage space according to their needs. The Slide-Away shelves offer added versatility, enabling users to make room for tall items with ease. Additionally, the Clear Humidity-Controlled Crispers help preserve fruits and vegetables by providing a climate-controlled environment.

Energy efficiency is another highlight, as these refrigerators are ENERGY STAR certified, meaning they consume less energy, which translates into lower utility bills. The integrated LED lighting illuminates the fridge’s interior excellently and is more energy-efficient than traditional lighting options.

Style is equally prioritized in these models. With a sleek stainless steel finish, they fit seamlessly into any kitchen decor, providing a modern aesthetic. The PrintShield Finish helps to resist fingerprints and smudges, keeping the exterior looking pristine with minimal effort.

The models also feature an In-Door-Ice System, which maximizes usable space inside the refrigerator by freeing up shelf space. The ice maker is conveniently located in the door, making it easy to access while ensuring more room for food storage.

Smart technology is also an option in some models, allowing for remote monitoring and temperature adjustments through smartphone applications. This feature promotes convenience and ensures food safety by alerting users to any temperature changes.

Overall, the KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models combine innovative technology with stylish design, making them a perfect addition to any kitchen looking for enhanced functionality and modern elegance. These refrigerators epitomize KitchenAid's focus on quality and reliability, catering to the needs of discerning home cooks.