Check and Adjust theBurners, To Adjust

KitchenAid KFRS365T, KFRS271T Check and Adjust theBurners, If Converting to LP Gas, To Adjust

If Converting to LP Gas

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: A 20 lb LP gas fuel tank must be purchased separately.

IMPORTANT: The gas pressure regulator/hose assembly supplied with the conversion kit must be used. Replacement gas pressure regulator/hose assembly specific to your model, is available from your outdoor grill dealer.

To Install the 20 lb LP Gas Fuel Tank:

1.Install the 20 lb LP gas fuel tank into the compartment below the grill.

2.Screw the gas pressure regulator/hose assembly to the 20 lb LP gas fuel tank as shown.

A. 20 lb LP gas fuel tank

B. Gas pressure regulator/hose assembly

3.Turn on the gas supply. Wait a few minutes for gas to move through the gas line.

4.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

5.The igniter battery is not factory installed. A 1.5 volt “D” size alkaline battery is located in the accessory box on the grill grate. Install battery at this time following the instructions in “Replacing the Igniter Battery” section.

6.Go to “Check and Adjust the Burners” section.

Check and Adjust theBurners

The burners are tested and factory-set for most efficient operation. However, variations in gas supply and other conditions may make minor adjustments to air shutter or low flame setting necessary.

It is recommended that a qualified person make burner adjustments.

NOTE: The rotisserie burner cannot be adjusted.

Checking and adjusting the grill burner flames requires removing the grate and sear plates.

Burner Flame Characteristics

The flames of the grill burners and side burners (on some models) should be blue and stable with no excessive noise or lifting (LP gas flames will have a slightly yellow tip). A yellow flame indicates not enough air. If flame is noisy or lifts away from the burner, there is too much air. Some yellow tips on flames when the burner is set to HI setting are acceptable as long as no carbon or soot deposits appear.

Check that burners are not blocked by dirt, debris, insect nests, etc. and clean as necessary. If they are clean, adjust air shutters as needed.

IMPORTANT: Before adjusting air shutters, let burners cool completely.

To Adjust:

1.Light grill using information in the “Outdoor Grill Use” section.

2.Observe flame to determine which burners need adjustment and how the flame is acting.

3.Turn off the valve and wait until grill and burners cool completely.

4.Remove grill grates and sear plates.

5.Remove the 2 screws that hold the burner in place. Remove gas burner from the grill.

A. 2 screws

KBNS271T, KFRS365T, KFRS271T, KBNS361T, KFRS361T specifications

The KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models offer a blend of performance, style, and innovative features ideal for any modern kitchen. These refrigerator models exemplify KitchenAid's commitment to quality and user-friendly design, making them popular choices for home chefs and families alike.

One standout feature across these models is their advanced cooling technologies. With the Preserva Food Care System, each of these refrigerators ensures optimal freshness for your food by utilizing two distinct cooling systems that maintain ideal humidity levels and temperatures. This minimizes the mixing of odors and prolongs the shelf life of your ingredients.

The interior layout is designed for both function and convenience. Each model includes adjustable shelves, allowing users to customize their storage space according to their needs. The Slide-Away shelves offer added versatility, enabling users to make room for tall items with ease. Additionally, the Clear Humidity-Controlled Crispers help preserve fruits and vegetables by providing a climate-controlled environment.

Energy efficiency is another highlight, as these refrigerators are ENERGY STAR certified, meaning they consume less energy, which translates into lower utility bills. The integrated LED lighting illuminates the fridge’s interior excellently and is more energy-efficient than traditional lighting options.

Style is equally prioritized in these models. With a sleek stainless steel finish, they fit seamlessly into any kitchen decor, providing a modern aesthetic. The PrintShield Finish helps to resist fingerprints and smudges, keeping the exterior looking pristine with minimal effort.

The models also feature an In-Door-Ice System, which maximizes usable space inside the refrigerator by freeing up shelf space. The ice maker is conveniently located in the door, making it easy to access while ensuring more room for food storage.

Smart technology is also an option in some models, allowing for remote monitoring and temperature adjustments through smartphone applications. This feature promotes convenience and ensures food safety by alerting users to any temperature changes.

Overall, the KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models combine innovative technology with stylish design, making them a perfect addition to any kitchen looking for enhanced functionality and modern elegance. These refrigerators epitomize KitchenAid's focus on quality and reliability, catering to the needs of discerning home cooks.