KitchenAid KBNS361T, KFRS271T, KFRS365T, KFRS361T Electrical Requirements, Grill Size Cutout Width

Page 8

 

A

 

 

 

 

Grill Size

Cutout Width

 

 

 

 

27" (68.6 cm)

29⁵⁄₈" (75.2 cm)

 

 

 

 

36" (91.4 cm)

38⁵⁄₈" (98.0 cm)

 

 

 

 

 

B

 

 

 

 

Optional Access Doors*

Cutout Width

 

 

 

 

27" (68.6 cm)

25¹⁄₈" (64.1 cm)

 

 

 

 

30" (76.2 cm)

28¹⁄₈" (71.1 cm)

 

 

 

 

36" (91.4 cm)

34¹⁄₈" (87.0 cm)

 

 

 

48" (121.9 cm)

46¹⁄₈" (117.4 cm)

 

 

 

 

C

 

 

 

 

Optional Drawers*

Width

Depth

 

 

 

14" (35.6 cm)

12¼" (31.8 cm)

23⁵⁄₈" (60.0

Utility Drawers

 

cm)

 

 

 

14" (35.6 cm)

12¼" (31.8 cm)

23⁵⁄₈" (60.0

Trash Drawers

 

cm)

 

 

 

*See “Assistance or Service” section to order.

Built-in Outdoor Grill Enclosure Ventilation for LP Gas:

An enclosure for an LP gas fuel tank is to be ventilated by openings at both the top and lower levels of the enclosure.

If converting to LP gas these vents are to be in the enclosure:

An enclosure for use with an LP gas fuel tank for built-in installation is to have at least one ventilation opening on an exposed exterior side located within 5" (12.7 cm) of the top is to be a minimum of 20 in.2 (129.0 cm2). One ventilation opening within 1" (2.5 cm) of the bottom of the enclosure and the bottom opening is to be a minimum of 10 in.2 (64.5 cm2). All vent openings are to be unobstructed. Every opening is to be a minimum of ¹⁄₈" (0.32 cm) wide.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure whether the grill is properly grounded.

It is not recommended to ground to a gas pipe.

A120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is required.

It is recommended that a separate circuit servicing only this grill be provided.

On freestanding models, the model/serial number rating plate is located inside the grill cabinet on the right-hand cabinet side. See the following illustration.

A

20 in.2 (129.0 cm2) min. ventilation both sides

1" (2.5 cm) max.

10 in.2 (64.5 cm2) min. ventilation both sides

5" (12.7 cm) max.

A. Model/serial number plate

On built-in models, the model/serial number rating plate is located on the right-hand side of the grill. See the following illustration.

5" (12.7 cm) max.

A

A. Model/serial number plate

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Outdoor Grills Table of Contents Table DES MatièresOutdoor Grill Safety Your safety and the safety of others are very importantPage Important Safety Instructions Installation Requirements Toolsand PartsLocation Requirements Style 1 Freestanding Outdoor GrillsProduct Dimensions Cabinet Cutout DimensionsBuilt-In OutdoorGrill Enclosure Built-In Outdoor GrillsOptional Access Doors Cutout Width Electrical RequirementsBuilt-in Outdoor Grill Enclosure Ventilation for LP Gas Grill Size Cutout WidthStyle1 Freestanding OutdoorGrills Gas Supply RequirementsGas Connection Requirements Style 2 -Built-In Outdoor Grills Local LP Gas SupplyNatural Gas Conversion Natural GasInstallation Instructions Style 1 FreestandingOutdoor GrillInstallationLP Gas Conversion Using a Local LP Gas Supply LP Gas Conversion Using a 20 lb LP Gas Fuel TankAttach Cabinet Doors on some models Remove Packaging Material Inside the GrillMake Gas Connection LP GasTo Install the 20 lb LP Gas Fuel Tank If Converted to Natural GasNatural Gas Use Style2- Built-In OutdoorGrill InstallationPlug in Grill Single-prong plug Check and Adjust theBurners Burner Flame CharacteristicsTo Adjust If Converting to LP GasLow Flame Adjustment Using YourOutdoor Grill Outdoor Grill USEControl Panel Inspect the LP Gas Fuel Tank Supply HoseUsingYourInfrared SearBurner Prepare the Gas SupplyTurn the Gas Supply On Lighting the Grill and Infrared Sear BurnersLighting the Side Burner UsingYourSideBurnerManually lighting the side burner UsingYourRotisserie Optional AccessoryTo Use Lighting the Rotisserie BurnerTrussing Poultry for the Rotisserie RotisserieCooking TipsManually Lighting the Rotisserie Burner Hood Lights Using YourSmokerBoxOn some models and as an accessory Tips for Outdoor Grilling CookingMethodsChicken GrillingChartTotal minutes Beef Fresh Vegetables Total minutes Fish and SeafoodTurkey Replacingthe Igniter Battery GeneralCleaningCleaning Method Outdoor Grill CareWarming Shelf Nothing will operate TroubleshootingInfrared Sear Burners on some models Assistance or Service AccessoriesTheU.S.A CanadaKitchenaid Outdoor Product Warranty CallPage Sécurité DU Gril Dextérieur Votre sécurité et celle des autres est très importanteAvertissement Conservez CES Instructions Exigences Dinstallation Exigences demplacementOutillageetpièces Style 1 -Grils dextérieur autoportantsDimensionsdu produit Dimensions des ouverturesà découperdans LeplacardEnceinte du grildextérieur encastré Grils dextérieur encastrésTiroirs facultatifs Largeur Profondeur SpécificationsélectriquesPortes daccès facultatives* Largeur de louverture Détendeur Méthode recommandée de mise à la terreSpécifications delalimentation en gaz Puissance thermique des brûleurs en altitude Test de pressurisation de la canalisation de gazAlimentation par bouteille de propane Alimentation au propane par canalisation localeConversion pour lalimentation au gaz naturel Gaz naturelInstallation de létagère latérale sur certains modèles Instructions DinstallationStyle 1 -Installation du gril dextérieur autoportant Installation des portes du placard sur certains modèles Élimination des matériaux demballage à lintérieur du grilRaccordement au gaz Gaz propaneInstallation de la bouteille de propane de 20 lb Alimentation au gaz naturel après conversionStyle2- Installation du gril dextérieur Encastré Branchement du grilAlimentation au gaz naturel Conversion pour lalimentation au propane Contrôle et réglagedes brûleurs Caractéristiques des flammes sur les brûleursRéglage pour le débit thermique minimum Processus de réglageUtilisation du grildextérieur Tableau de commandeUtilisation DU Gril Dextérieur Allumage du brûleur du gril et du brûleur à infrarouge Préparation de la source de gazOuvrir larrivée de gaz Utilisation dubrûleur à infrarouge Utilisation du brûleur latéralAllumage du brûleur latéral Allumage manuel des brûleurs latérauxUtilisation Accessoire en optionUtilisation du tournebroche Allumage manuel du brûleur du tournebroche Conseils de cuisson à l’aide du tournebrocheAllumage du brûleur du tournebroche Sur certains modèles ou disponible comme accessoire Utilisation du fumoirLampes sous le capot Troussage de la volaille pour utilisation du tournebrocheMéthodesdecuisson Total Bœuf Tableau decuisson au grilMinutes au Total Poulet Poisson et fruits de merDinde Légumes fraisRemplacement delapile delallumeur Entretien DU Gril DextérieurChangementdelampouledéclairage Total Légumes frais à suivreNettoyagegénéral Méthode de nettoyageBrûleurs EN Forme DE U Brûleurs À Infrarouge sur certains modèlesDépannage Assistance OU ServiceAccessoires Garantie DES Produits Pour Usage Extérieur Kitchenaid Garantie Limitée DE UN ANComposer le 1-800-422-1230. Au Canada, composer le W10110724 All rights reserved Tous droits réservés

KBNS271T, KFRS365T, KFRS271T, KBNS361T, KFRS361T specifications

The KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models offer a blend of performance, style, and innovative features ideal for any modern kitchen. These refrigerator models exemplify KitchenAid's commitment to quality and user-friendly design, making them popular choices for home chefs and families alike.

One standout feature across these models is their advanced cooling technologies. With the Preserva Food Care System, each of these refrigerators ensures optimal freshness for your food by utilizing two distinct cooling systems that maintain ideal humidity levels and temperatures. This minimizes the mixing of odors and prolongs the shelf life of your ingredients.

The interior layout is designed for both function and convenience. Each model includes adjustable shelves, allowing users to customize their storage space according to their needs. The Slide-Away shelves offer added versatility, enabling users to make room for tall items with ease. Additionally, the Clear Humidity-Controlled Crispers help preserve fruits and vegetables by providing a climate-controlled environment.

Energy efficiency is another highlight, as these refrigerators are ENERGY STAR certified, meaning they consume less energy, which translates into lower utility bills. The integrated LED lighting illuminates the fridge’s interior excellently and is more energy-efficient than traditional lighting options.

Style is equally prioritized in these models. With a sleek stainless steel finish, they fit seamlessly into any kitchen decor, providing a modern aesthetic. The PrintShield Finish helps to resist fingerprints and smudges, keeping the exterior looking pristine with minimal effort.

The models also feature an In-Door-Ice System, which maximizes usable space inside the refrigerator by freeing up shelf space. The ice maker is conveniently located in the door, making it easy to access while ensuring more room for food storage.

Smart technology is also an option in some models, allowing for remote monitoring and temperature adjustments through smartphone applications. This feature promotes convenience and ensures food safety by alerting users to any temperature changes.

Overall, the KitchenAid KFRS361T, KBNS361T, KFRS271T, KFRS365T, and KBNS271T models combine innovative technology with stylish design, making them a perfect addition to any kitchen looking for enhanced functionality and modern elegance. These refrigerators epitomize KitchenAid's focus on quality and reliability, catering to the needs of discerning home cooks.
Top Page Image Contents