Installation
Continued
INSTALLING LOGS
WARNING: Failure to posi- tion the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
CAUTION: Do not remove the data plates attached to the heater base assembly. The data plates contain important safety and warranty information.
It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Place bottom log in center of the base assem- bly as shown in Figure 24.
2.Rest rear log in back corner sections of base assembly as shown in Figure 24. Make sure log is completely vertical and not leaning in toward burner where the flame will touch the log.
3.Position front right log against right side of grate prongs (see Figure 24).
4.Position front left log against left side of grate prongs (see Figure 24).
5.Place middle right log over front right and bot- tom logs as shown in Figure 25. Be sure hole in middle right log seats over pin in bottom log.
6.Place middle left log over front left and bot- tom logs as show in Figure 25. Be sure hole in middle left log seats over pin in front left log.
7.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 26).
WARNING:You must operate this fireplace with the fireplace screen in place. Make sure fire- place screen is in place before running fireplace.
Front |
|
Left Log | Rear Log |
Grate |
| Bottom |
| Log | |
Prongs |
| |
Base | Front Right | |
| Assembly | |
| Log | |
|
|
Figure 24 - Installing Bottom Logs
Middle Left Log
Middle
Right Log
Pin on Front | Bottom |
Left Log | Log |
Figure 25 - Installing Top Logs
Notches
Screws for
Mounting Screen
Figure 26 - Installing Fireplace Screen
16 | www.desatech.com |