On/Off Model HRC100, Thermostat Model HRC200

OPERATING fireplace

Continued

Flame Adjustment Knob


				OL
ON	N
OFF	N
OFF	O			O
REMOTE	T	F	F
REMOTE	O	F		HI
	LIP			HI

Selector Switch in Remote	Control Knob
Position (Optional Hand-	in On Position
Held Remote Control)

Figure 30 - Setting the Selector Switch, Control Knob, and Flame Adjustment Knob for Hand-Held Remote Operation

On/Off Model HRC100

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 31).

To Lock press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

To Unlock press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Control Button

Turns Burners

On and Off

Figure 31 - On/Off Hand-Held Remote

Control Unit

Thermostat Model HRC200

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 32). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press the MANU button to turn on the fireplace.

3.Press the POWER and LOCK buttons together to turn off the fireplace.

Auto (Thermostatic) Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press AUTO button to select this mode.

3. Set the desired room temperature by press- ing the TEMP + or - buttons.

4. Press the POWER and LOCK buttons together to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace.

Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Digital					Turns Hand-
Display					Held Remote
Shows					On or Off and
Temperature		ROOM		SET	Allows You
and Settings			AUTO		to Choose
and Settings		TEMP		TEMP	to Choose
Turns		LOCK	TEMP POWER		the Manual
Turns					Setting
Burners On		MANU		AUTO
or Off		MANU	ºC/ºF	AUTO	Selects Auto
Decreases					Setting
Decreases
Room					Increases
Temperature					Room
in AUTO					Temperature
Mode	Locks System				in AUTO

to Prevent	Mode
to Prevent
Accidental Ignition

Figure 32 - Thermostat Hand-Held

Remote Control Unit Selections HRC200

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Auto Shutoff Feature

1. If the average room temperature exceeds

82 degrees Fahrenheit (28 degrees Centi- grade), the hand-held remote control will perform a safety override and shut the fireplace off. This feature is not available in the MANU mode.

119304-01A