Hearth and Home Technologies CASTLEWOOD 42 Listing Label Information/Location, Grate, Number

Page 2
WARNING! THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS LOG SET. TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT INSTALL AN UNVENTED GAS LOG SET INTO FIREPLACE.
WARNING! TO AVOID THE RISK OF DAMAGING FIREPLACE MATERIALS AND INCREASING THE RISK OF SPREADING A FIRE DO NOT USE THE FIREPLACE TO COOK OR WARM FOOD.
RATED AT
115 VOLTS, 50/60 Hz.,
AMP.

Read this manual before installing or operating this fireplace.

Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Outdoor Lifestyles wood burning fireplace. The Outdoor Lifestyles fireplace you have selected is designed to provide the utmost in safety, reliability and efficiency.

As the owner of a new fireplace, you’ll want to read and carefully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference. We suggest you keep it with your other important documents and product manuals.

The information contained in this owner’s manual unless noted otherwise, applies to all models and gas control systems.

Your new Outdoor Lifestyles wood burning fireplace will give you years of durable use and trouble-free enjoyment. Welcome to the Outdoor Lifestyles family of fireplace products!

 

Homeowner Reference Information

We recommend that you record the following pertinent

 

 

 

 

 

 

 

information about your fireplace:

 

 

Model Name:

 

 

Date purchased/installed:

 

 

 

Serial Number:

 

 

Location on fireplace:

 

 

 

Dealership purchased from:

 

 

Dealer phone:

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing Label Information/Location

The model information regarding your specific fireplace can be found on the rating plate located on the smoke shield of the fireplace.

Serial

Grate

Fireplace

Number

 

Model

FIREPLACE NO.

FIRE DAMAGE. REPLACE MODEL NO.

MODEL NO.

MFG. DATE

WARNING: RISK OF

 

 

GRATE WITH HEARTH & HOME

 

 

 

 

TECHNOLOGIES INC.

 

 

 

 

OUTDOOR FIREPLACE INTENDED FOR USE WITH HEARTH & HOME TECHNOLOGIES INC. LISTED FIREPLACE PARTS. SEE INSTALLATION AND OPERATING INSTRUCTIONS FOR THIS MODEL. ONLY HEARTH & HOME TECHNOLOGIES INC. GLASS DOOR KITS CAN BE INSTALLED ON THIS UNIT.

FIREPLACE ALSO FOR USE

YES

 

NO

 

CLEARANCE TO

CHIMNEY

FIREBOX

 

IN.

IN MANUFACTURED HOMES

 

 

COMBUSTIBLES:

2 IN. MIN.

 

MIN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAN KIT MODEL NO.

&

DO NOT OVERFIRE. USE ONLY: SOLID WOOD FUEL OR

LISTED DECORATIVE GAS APPLIANCE. DO NOT USE A

FIREPLACE INSERT OR OTHER PRODUCTS NOT

SPECIFIED FOR USE WITH THIS PRODUCT. IF DOORS

ARE USED OPERATE FIREPLACE WITH DOORS FULLY

OPEN OR CLOSED ONLY. WHEN BURNING A

DECORATIVE GAS APPLIANCE IN THE FIREPLACE,

ADJUST DAMPER TO THE FULLY OPEN POSITION.

IF INSTALLATION OR OPERATING INSTRUCTIONS ARE MISSING CONTACT: HEARTH & HOME TECHNOLOGIES INC.,

1915 W. SAUNDERS ST., MT. PLEASANT, IA 52641.

2

Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Hot glass will cause burns Fire RiskNumber Listing Label Information/LocationGrate Table of Contents Not intended for use as a primary heat source Listing and Code ApprovalsAppliance Certification Do not overfireGetting Started Firescreen Inspect Fireplace and ComponentsGrate Cooling AirSelecting Fireplace Location Freestanding Installations see FigureFraming and Clearances Exterior Walls see FigureFreestanding Installation Clearances Sidewalls/Surrounds Frame the FireplaceChimney Requirements Level the Fireplace Installation of FireplaceSecure the Fireplace Position the Fireplace Place the Protective Metal Hearth StripsInstall Cooling Air Hoods Chimney Assembly Height of Chimney ComponentsAssemble the Chimney Sections Using Offsets/Returns Chase Top Install the Termination CapComplete the Enclosure ST1175/ST475 Square Termination CapInstalling a TCT1175 Square Termination Cap TCT1175 Terra Cotta CapInstallation of Molded Brick Panel Install Side Molded Brick PanelInstall Screens Mortar Optional GrateGas Code, Ansi Z223.1 AccessoriesGas Log/Lighter Provisions Asphyxiation Risk= 1/k x inches of thickness FinishingHearth Extension Framing Material Raised Hearth Extension FramingNon-combustible Equivalent insulationNon-combustible Sealant Flush Hearth Extension FramingFinishing Material Use only non-combustible framing material below standoffsMantel StandoffsOperating Instructions General InformationFire Risk Smoke Risk Clear Space Near the FireplaceGlass Doors Wood Fuel FirewoodStarting a Fire Troubleshooting Diagnostics and Problem SolvingMaintenance and Servicing the Fireplace Disposal of Ashes Chimney Inspection/CleaningClean Maintenance Task ListWhen cleaning glass door Chimney FireFireplace Dimensions Reference MaterialsOptional Components Chimney Components Catalog #330 mm 51 mm Termination caps 15-3/4 400 mmService Parts List ODCASTLEWD-42Herringbone Molded Brick Panel At DepotTraditional Molded Brick Panel Warranty Coverage Limited Warranty This warranty is void ifRO N a CO ISD D

CASTLEWOOD 42 specifications

Hearth and Home Technologies has consistently been at the forefront of innovative fireplace solutions, and the CASTLEWOOD 42 is no exception. This exquisite linear gas fireplace is a perfect blend of modern design and advanced technology, making it a sought-after choice for homeowners looking to elevate their living spaces.

One of the standout features of the CASTLEWOOD 42 is its impressive 42-inch width, which allows it to serve as a stunning focal point in both contemporary and traditional interiors. The fireplace is designed with a sleek, clean appearance, featuring large viewing glass and a minimalist frame that creates an unobstructed view of the mesmerizing flames. With its flush-mount design, the CASTLEWOOD 42 can be easily incorporated into a variety of wall configurations, making it versatile enough for any room.

The CASTLEWOOD 42 is powered by advanced Direct Vent technology, ensuring efficient and safe operation. This system allows for the expulsion of combustion gases outside the home, while simultaneously drawing in fresh air for combustion. As a result, the fireplace operates cleanly, providing warmth without compromising indoor air quality. Additionally, the unit is designed to produce up to 30,000 BTUs, delivering sufficient heat to keep spaces cozy during chilly weather.

One of the most impressive aspects of the CASTLEWOOD 42 is its customizable options. Homeowners can choose from a variety of decorative media, such as glass rocks, driftwood, or ceramic logs, to personalize the fireplace and match their decor. The included LED accent lighting enhances the ambience by providing a soft glow that highlights the decorative elements, creating a warm and inviting atmosphere.

Remote control capability is another notable feature of the CASTLEWOOD 42, allowing users to effortlessly adjust the flame height and heat output from the comfort of their couch. Add-on options such as wall-mounted control panels or smartphone integration elevate convenience, ensuring that comfort is just a click away.

The CASTLEWOOD 42 not only excels in aesthetics and functionality but also adheres to high safety standards. With features like tempered glass and a secure venting system, it ensures peace of mind for families. Overall, the Hearth and Home Technologies CASTLEWOOD 42 stands as a testament to quality craftsmanship and innovative design, making it a brilliant addition to any home. Its combination of style, efficiency, and technology proves that fireplaces can be both functional and beautiful.
Top Page Image Contents