Hearth and Home Technologies CASTLEWOOD 42 owner manual Finishing, Hearth Extension

A. Non-combustible Materials

•Materials which will not ignite and burn, composed of any combination of the following:

•Materials reported as passing ASTM E 136, Standard

Test Method for Behavior of Metals, in a Vertical Tube Furnace at 750° C

B. Combustible Materials

•Materials made of or surfaced with any of the following materials:

•Any material that can ignite and burn; flame proofed or not, plastered or un-plastered

C. Hearth Extension

WARNING! Risk of fire! High temperatures, sparks, em- bers or other burning material falling from the fireplace may ignite flooring or concealed combustible surfaces.

•Metal hearth strips MUST be installed (Section 7.C.).

•Hearth extensions MUST be installed exactly as specified.

Table 12.1

R = 1/k x inches of thickness

Table 12.2

•You MUST use a hearth extension with this fireplace.

•This fireplace has been tested and approved for use with a hearth extension insulated to a minimum R value of 2.32.

•The hearth extension material MUST be covered with tile, stone or other non-combustible material.

•Manufactured hearth materials will usually have a published R value (resistance to heat) or k value (conductivity of heat). Refer to the formula in Table 12.1 to convert a k value to an R value,

•Refer to Table 12.2 for hearth extension insulation alternatives.