Hearth and Home Technologies CASTLEWOOD 42 owner manual Accessories, Gas Log/Lighter Provisions

Page 21

8Accessories

A. Gas Log/Lighter Provisions

A certified gas log lighter or decorative gas log set can be installed in this fireplace.

This fireplace was not tested and listed for use with an un- vented gas log heater. Do not install an unvented gas log heater in this fireplace and operate it with the flue damper in the closed position unless the unvented gas log heater has been specifically tested and listed for use in this fireplace by Underwriters Laboratories Inc.

Use of an unvented gas log heater in this factory built fireplace may create a fire hazard that can result in a structure fire.

•Maximum input is 100,000 BTU/hr.

•Decorative gas appliance must be certified to ANSI Z21.60 “Standard for Decorative Gas Appliances for Installation in Vented Fireplaces”.

•Must be installed in accordance with the National Fuel

Gas Code, ANSI Z223.1.

•A log set must incorporate a gas shutoff.

•Log set requires the damper to be locked fully open. Knockouts are provided on both sides of the fireplace and in refractories for 1/2 in. (13 mm) iron pipe.

•We recommend you seal refractory around pipe with fireplace mortar or high temperature, noncombustible sealant.

•Repack insulation from the knockout around the pipe.

•Maintain 1-1/2 in. (38 mm) air space around the pipe for 4 in. (102 mm) beyond the fireplace.

•See Figure 8.1.

WARNING

Asphyxiation Risk

•Damper must be locked open when gas logs installed.

Gas fire generates fumes.

WARNING

Fire Risk

•For use with solid wood fuel or decorative gas appliance only.

•DO NOT install unvented gas logs.

WARNING

Fire Risk

Explosion Risk

Inspect appliance and components for damage. Damaged parts may impair safe operation.

•Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components

Report damaged parts to dealer.

Firebox

Refractory

Seal with fireplace mortar or non-combust- ible sealant

Outer shell of fireplace

Maintain air clearance to combustibles.

Combustible materials

Gas line

Repack insulation knockout

Gas line

4 in. (102 mm)

1 1/2 in. (38 mm) air space around

pipe

Combustible materials may be located at zero clearance to gas line beyond 4 in. (102 mm) from fireplace side.

Figure 8.1 Gas Line Installation

Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Fire Risk Hot glass will cause burnsListing Label Information/Location GrateNumber Table of Contents Appliance Certification Listing and Code ApprovalsNot intended for use as a primary heat source Do not overfireGetting Started Grate Inspect Fireplace and ComponentsFirescreen Cooling AirFraming and Clearances Freestanding Installations see FigureSelecting Fireplace Location Exterior Walls see FigureFreestanding Installation Clearances Frame the Fireplace Sidewalls/SurroundsChimney Requirements Secure the Fireplace Position the Fireplace Installation of FireplaceLevel the Fireplace Place the Protective Metal Hearth StripsInstall Cooling Air Hoods Height of Chimney Components Chimney AssemblyAssemble the Chimney Sections Using Offsets/Returns Complete the Enclosure Install the Termination CapChase Top ST1175/ST475 Square Termination CapTCT1175 Terra Cotta Cap Installing a TCT1175 Square Termination CapInstall Side Molded Brick Panel Installation of Molded Brick PanelMortar Optional Grate Install ScreensGas Log/Lighter Provisions AccessoriesGas Code, Ansi Z223.1 Asphyxiation RiskFinishing Hearth Extension= 1/k x inches of thickness Non-combustible Raised Hearth Extension FramingFraming Material Equivalent insulationFlush Hearth Extension Framing Non-combustible SealantUse only non-combustible framing material below standoffs Finishing MaterialStandoffs MantelGeneral Information Operating InstructionsClear Space Near the Fireplace Glass DoorsFire Risk Smoke Risk Firewood Wood FuelStarting a Fire Diagnostics and Problem Solving TroubleshootingDisposal of Ashes Chimney Inspection/Cleaning Maintenance and Servicing the FireplaceWhen cleaning glass door Maintenance Task ListClean Chimney FireReference Materials Fireplace DimensionsOptional Components Catalog # Chimney Components330 mm 51 mm 15-3/4 400 mm Termination capsODCASTLEWD-42 Service Parts ListAt Depot Traditional Molded Brick PanelHerringbone Molded Brick Panel Warranty Coverage This warranty is void if Limited WarrantyRO N a CO ISD D

CASTLEWOOD 42 specifications

Hearth and Home Technologies has consistently been at the forefront of innovative fireplace solutions, and the CASTLEWOOD 42 is no exception. This exquisite linear gas fireplace is a perfect blend of modern design and advanced technology, making it a sought-after choice for homeowners looking to elevate their living spaces.

One of the standout features of the CASTLEWOOD 42 is its impressive 42-inch width, which allows it to serve as a stunning focal point in both contemporary and traditional interiors. The fireplace is designed with a sleek, clean appearance, featuring large viewing glass and a minimalist frame that creates an unobstructed view of the mesmerizing flames. With its flush-mount design, the CASTLEWOOD 42 can be easily incorporated into a variety of wall configurations, making it versatile enough for any room.

The CASTLEWOOD 42 is powered by advanced Direct Vent technology, ensuring efficient and safe operation. This system allows for the expulsion of combustion gases outside the home, while simultaneously drawing in fresh air for combustion. As a result, the fireplace operates cleanly, providing warmth without compromising indoor air quality. Additionally, the unit is designed to produce up to 30,000 BTUs, delivering sufficient heat to keep spaces cozy during chilly weather.

One of the most impressive aspects of the CASTLEWOOD 42 is its customizable options. Homeowners can choose from a variety of decorative media, such as glass rocks, driftwood, or ceramic logs, to personalize the fireplace and match their decor. The included LED accent lighting enhances the ambience by providing a soft glow that highlights the decorative elements, creating a warm and inviting atmosphere.

Remote control capability is another notable feature of the CASTLEWOOD 42, allowing users to effortlessly adjust the flame height and heat output from the comfort of their couch. Add-on options such as wall-mounted control panels or smartphone integration elevate convenience, ensuring that comfort is just a click away.

The CASTLEWOOD 42 not only excels in aesthetics and functionality but also adheres to high safety standards. With features like tempered glass and a secure venting system, it ensures peace of mind for families. Overall, the Hearth and Home Technologies CASTLEWOOD 42 stands as a testament to quality craftsmanship and innovative design, making it a brilliant addition to any home. Its combination of style, efficiency, and technology proves that fireplaces can be both functional and beautiful.
Top Page Image Contents