Hearth and Home Technologies CASTLEWOOD 42 Operating Instructions, General Information

Page 27

10 Operating Instructions

WARNING

Fire Risk

•Do not operate fi replace before reading and understanding operating instructions.

Failure to operate fi replace properly may cause fi re.

A. General Information

Fireplaces, as well as other woodburning appliances, have been used safely for many years. It has been our experience that most problems are caused by improper installation and operation of the fi replace. Make certain that installation and operation of the fi replace system is in accordance with these instructions.

It is extremely important that the fi re be supervised when- ever the fi replace is in use. It is also recommended that an annual inspection be performed on the fi replace system to determine if the fl ue system needs to be cleaned, or as in the case of any appliance, if minor repairs are required to maintain the system in top operating condition.

B. Grate

The factory installed integral grate must be used to hold the logs from falling out of an open fi replace and to allow air to pass between the burning logs. It is important to keep the fi re off the hearth and to allow the ashes to collect beneath the fi re, thereby forming a layer of additional heat protection.

WARNING

Fire Risk

•Use only factory installed integral grate. May cause overfi re.

WARNING

HOT SURFACES!

Glass and other surfaces are hot during operation and cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

•NEVER allow children to touch glass

•Keep children away

•CAREFULLY SUPERVISE children in same room as appliance.

•Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

•Keep clothing, furniture, draperies and other combustibles away.

WARNING

Fire Risk

•For use with solid wood fuel or decorative gas appliance only.

•Do not install unvented gas logs.

Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Fire Risk Hot glass will cause burnsListing Label Information/Location GrateNumber Table of Contents Do not overfire Listing and Code ApprovalsAppliance Certification Not intended for use as a primary heat sourceGetting Started Cooling Air Inspect Fireplace and ComponentsGrate FirescreenExterior Walls see Figure Freestanding Installations see FigureFraming and Clearances Selecting Fireplace LocationFreestanding Installation Clearances Frame the Fireplace Sidewalls/SurroundsChimney Requirements Place the Protective Metal Hearth Strips Installation of FireplaceSecure the Fireplace Position the Fireplace Level the FireplaceInstall Cooling Air Hoods Height of Chimney Components Chimney AssemblyAssemble the Chimney Sections Using Offsets/Returns ST1175/ST475 Square Termination Cap Install the Termination CapComplete the Enclosure Chase TopTCT1175 Terra Cotta Cap Installing a TCT1175 Square Termination CapInstall Side Molded Brick Panel Installation of Molded Brick PanelMortar Optional Grate Install ScreensAsphyxiation Risk AccessoriesGas Log/Lighter Provisions Gas Code, Ansi Z223.1Finishing Hearth Extension= 1/k x inches of thickness Equivalent insulation Raised Hearth Extension FramingNon-combustible Framing MaterialFlush Hearth Extension Framing Non-combustible SealantUse only non-combustible framing material below standoffs Finishing MaterialStandoffs MantelGeneral Information Operating InstructionsClear Space Near the Fireplace Glass DoorsFire Risk Smoke Risk Firewood Wood FuelStarting a Fire Diagnostics and Problem Solving TroubleshootingDisposal of Ashes Chimney Inspection/Cleaning Maintenance and Servicing the FireplaceChimney Fire Maintenance Task ListWhen cleaning glass door CleanReference Materials Fireplace DimensionsOptional Components Catalog # Chimney Components330 mm 51 mm 15-3/4 400 mm Termination capsODCASTLEWD-42 Service Parts ListAt Depot Traditional Molded Brick PanelHerringbone Molded Brick Panel Warranty Coverage This warranty is void if Limited WarrantyRO N a CO ISD D

CASTLEWOOD 42 specifications

Hearth and Home Technologies has consistently been at the forefront of innovative fireplace solutions, and the CASTLEWOOD 42 is no exception. This exquisite linear gas fireplace is a perfect blend of modern design and advanced technology, making it a sought-after choice for homeowners looking to elevate their living spaces.

One of the standout features of the CASTLEWOOD 42 is its impressive 42-inch width, which allows it to serve as a stunning focal point in both contemporary and traditional interiors. The fireplace is designed with a sleek, clean appearance, featuring large viewing glass and a minimalist frame that creates an unobstructed view of the mesmerizing flames. With its flush-mount design, the CASTLEWOOD 42 can be easily incorporated into a variety of wall configurations, making it versatile enough for any room.

The CASTLEWOOD 42 is powered by advanced Direct Vent technology, ensuring efficient and safe operation. This system allows for the expulsion of combustion gases outside the home, while simultaneously drawing in fresh air for combustion. As a result, the fireplace operates cleanly, providing warmth without compromising indoor air quality. Additionally, the unit is designed to produce up to 30,000 BTUs, delivering sufficient heat to keep spaces cozy during chilly weather.

One of the most impressive aspects of the CASTLEWOOD 42 is its customizable options. Homeowners can choose from a variety of decorative media, such as glass rocks, driftwood, or ceramic logs, to personalize the fireplace and match their decor. The included LED accent lighting enhances the ambience by providing a soft glow that highlights the decorative elements, creating a warm and inviting atmosphere.

Remote control capability is another notable feature of the CASTLEWOOD 42, allowing users to effortlessly adjust the flame height and heat output from the comfort of their couch. Add-on options such as wall-mounted control panels or smartphone integration elevate convenience, ensuring that comfort is just a click away.

The CASTLEWOOD 42 not only excels in aesthetics and functionality but also adheres to high safety standards. With features like tempered glass and a secure venting system, it ensures peace of mind for families. Overall, the Hearth and Home Technologies CASTLEWOOD 42 stands as a testament to quality craftsmanship and innovative design, making it a brilliant addition to any home. Its combination of style, efficiency, and technology proves that fireplaces can be both functional and beautiful.
Top Page Image Contents