Hearth and Home Technologies CASTLEWOOD 42 Inspect Fireplace and Components, Grate, Firescreen

Page 6

E. Inspect Fireplace and Components

WARNING

Fire Risk

Explosion Risk

Inspect fireplace and components for damage. Damaged parts may impair safe operation.

•Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components

•Carefully remove the fireplace and components from the packaging.

The fireplace system consists of the following:

•Fireplace / Integral grate/dual cooling air inlet hoods, firescreen, and hearth refractory.

F. Grate

This fireplace is designed to be used with the grate sup- plied with this unit or one approved by HHT. The grate will deteriorate over time and will need occasional replace- ment.

Warning! Risk of Fire!

Use only the factory-supplied intergral grate. Keep logs in place.

Allows proper air circulation around the fire.

G. Firescreen

The firescreen is provided to control sparks. Keep it closed when the fireplace is in use.

WARNING! Risk of Fire or Burns!

Screen will not prevent burning materials from falling out. Screen pulls or handles may be hot.

H. Cooling Air

Cooling air is necessary to install the fireplace on a com- bustible surface and in a combustilbe enclosure. Two inlet hoods are provided and must be installled.

The complete structure must be noncombustible if the hoods are not installed.

I. Molded Brick Panel

•The molded brick panels are shipped separately, but required to contain heat and provide an attractive interior.

•They will deteriorate over time and will need occa- sional replacement. Small hairline cracks and discol- oration are normal and do not affect safety.

•Mortar is not necessary but can be used to enhance the appearance.

6

Outdoor Lifestyles by Hearth & Home Technologies Inc. • 4070-300 Rev C • 4/11

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Hot glass will cause burns Fire RiskListing Label Information/Location GrateNumber Table of Contents Not intended for use as a primary heat source Listing and Code ApprovalsAppliance Certification Do not overfireGetting Started Firescreen Inspect Fireplace and ComponentsGrate Cooling AirSelecting Fireplace Location Freestanding Installations see FigureFraming and Clearances Exterior Walls see FigureFreestanding Installation Clearances Sidewalls/Surrounds Frame the FireplaceChimney Requirements Level the Fireplace Installation of FireplaceSecure the Fireplace Position the Fireplace Place the Protective Metal Hearth StripsInstall Cooling Air Hoods Chimney Assembly Height of Chimney ComponentsAssemble the Chimney Sections Using Offsets/Returns Chase Top Install the Termination CapComplete the Enclosure ST1175/ST475 Square Termination CapInstalling a TCT1175 Square Termination Cap TCT1175 Terra Cotta CapInstallation of Molded Brick Panel Install Side Molded Brick PanelInstall Screens Mortar Optional GrateGas Code, Ansi Z223.1 AccessoriesGas Log/Lighter Provisions Asphyxiation RiskFinishing Hearth Extension= 1/k x inches of thickness Framing Material Raised Hearth Extension FramingNon-combustible Equivalent insulationNon-combustible Sealant Flush Hearth Extension FramingFinishing Material Use only non-combustible framing material below standoffsMantel StandoffsOperating Instructions General InformationClear Space Near the Fireplace Glass DoorsFire Risk Smoke Risk Wood Fuel FirewoodStarting a Fire Troubleshooting Diagnostics and Problem SolvingMaintenance and Servicing the Fireplace Disposal of Ashes Chimney Inspection/CleaningClean Maintenance Task ListWhen cleaning glass door Chimney FireFireplace Dimensions Reference MaterialsOptional Components Chimney Components Catalog #330 mm 51 mm Termination caps 15-3/4 400 mmService Parts List ODCASTLEWD-42At Depot Traditional Molded Brick PanelHerringbone Molded Brick Panel Warranty Coverage Limited Warranty This warranty is void ifRO N a CO ISD D

CASTLEWOOD 42 specifications

Hearth and Home Technologies has consistently been at the forefront of innovative fireplace solutions, and the CASTLEWOOD 42 is no exception. This exquisite linear gas fireplace is a perfect blend of modern design and advanced technology, making it a sought-after choice for homeowners looking to elevate their living spaces.

One of the standout features of the CASTLEWOOD 42 is its impressive 42-inch width, which allows it to serve as a stunning focal point in both contemporary and traditional interiors. The fireplace is designed with a sleek, clean appearance, featuring large viewing glass and a minimalist frame that creates an unobstructed view of the mesmerizing flames. With its flush-mount design, the CASTLEWOOD 42 can be easily incorporated into a variety of wall configurations, making it versatile enough for any room.

The CASTLEWOOD 42 is powered by advanced Direct Vent technology, ensuring efficient and safe operation. This system allows for the expulsion of combustion gases outside the home, while simultaneously drawing in fresh air for combustion. As a result, the fireplace operates cleanly, providing warmth without compromising indoor air quality. Additionally, the unit is designed to produce up to 30,000 BTUs, delivering sufficient heat to keep spaces cozy during chilly weather.

One of the most impressive aspects of the CASTLEWOOD 42 is its customizable options. Homeowners can choose from a variety of decorative media, such as glass rocks, driftwood, or ceramic logs, to personalize the fireplace and match their decor. The included LED accent lighting enhances the ambience by providing a soft glow that highlights the decorative elements, creating a warm and inviting atmosphere.

Remote control capability is another notable feature of the CASTLEWOOD 42, allowing users to effortlessly adjust the flame height and heat output from the comfort of their couch. Add-on options such as wall-mounted control panels or smartphone integration elevate convenience, ensuring that comfort is just a click away.

The CASTLEWOOD 42 not only excels in aesthetics and functionality but also adheres to high safety standards. With features like tempered glass and a secure venting system, it ensures peace of mind for families. Overall, the Hearth and Home Technologies CASTLEWOOD 42 stands as a testament to quality craftsmanship and innovative design, making it a brilliant addition to any home. Its combination of style, efficiency, and technology proves that fireplaces can be both functional and beautiful.
Top Page Image Contents