Weber 56204 manual Side Burner Maintenance, Removing The Sear Station Burner

MAINTENANCE

Removing The Sear Station® Burner

To remove the Sear Station Burner®, pull the burner tube toward you.. This removes it from the burner tube notch (7).. Then rotate the tube clockwise (8), taking care to rotate the burner tube so that the screw at the end of the tube (9) fits through the notch in the heat shield opening (10). When the burner tube is free, remove it from the firebox (11)..

J)To reinstall the manifold assembly, reverse steps G through I..

7	82	11
1		5

m CAUTION: The burner openings (12) must be positioned
properly over the valve orifices (13). Make sure the opposite	93
end of the burner tubes (14) properly align into the slots on
the backside of the cookbox. Check proper assembly before
fastening manifold in place.
m WARNING: After reinstalling the gas lines, they should be	4
leak checked with a soap and water solution before using
	10
the grill. (See “CHECK FOR GAS LEAKS”) ◆

2	12
13

143

SIDE BURNER MAINTENANCE

mWARNING: All gas controls and supply valves should be in the OFF position.

Make sure black wire is connected between the igniter and electrode..

Make sure white wire is connected between the igniter and grounding clip..

Spark should be a white/blue color, not yellow..

A)Igniter wire (1)

B)Ground wire (2)

C)Burner (3) ◆

Side Burner Grate

Side Burner Cap

SideBurnerRing & Head

IgniterElectrode

Control Knob

Igniter

3

2 1

1 2

www.weber.com® 35