Weber 3000 Series owner manual Assembly, Step, Check package contents

Assembly

Tools needed

Regular screwdriver

Phillips screwdriver

Hammer

7/16 inch or an adjustable wrench

Pliers

Step 1

Check package contents

Cooking box (assembly)

Lid (assembly)

® ®

Block of wood

Supplies needed

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

Hose

Bottom tray

Work table

Two accessory trays

Swing table

7