Weber 4000 owner manual Assembly, Step, Check package contents

Page 7

Assembly

Step 1

Tools needed

Check package contents

 

Screwdrivers, regular

and Phillips

Cooking box

(assembly)

 

Hammer

 

7/16, 5/8, 11/16, and 3/4 inch open-end or two adjustable wrenches

Lid (assembly)

® ®

Pliers

Block of wood

Supplies needed

Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")

You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")

Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long.

While we give much attention to our products, unfortunately an occasional error may occur.

If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free

1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

LP tank

LP tank filler adapter

Bottom tray

Work table

Two accessory trays

Two swing tables

7

Image 7
Contents Genesis 4000 Series LP GAS Units only Warranty Patents and Trademarks Contents Operating area For Installation in CanadaGeneral Instructions StorageCheck package contents AssemblyStep Page Page Check contents of hardware packs Assemble frame Assemble wheelsComplete frame assembly Continue frame assemblyInsert casters Add cooking box Install side burner locksAdd fuel scale Install tank panel assemblyCheck that all burner valves are off Install igniterInstall manifold bracket Install side burnerInstall left hand swing table Install right hand swing table Hinge rod View from rear of barbecue Fill LP tank Set LP fuel scaleWing nut Connect LP tankCheck for gas leaks Insert Flavorizer Bars Steam-N-Chips Smoker BARBECUE. Contact Weber-Stephen Customer ServiceInstall the bottom tray Install cooking gratesInstall the lid Secure side burner Complete accessory installationTry to light with a match LightingTo Extinguish Valve and burner control knobs and start overManual Lighting Lighting the side burner Side burner will only operate when the Front burner is litStorage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseTo use the Steam-N-Chips Smoker Using the Steam-N-Chips SmokerRemoval of the LP tank Refilling the LP tankMale fitting Regulator Collar Quick disconnect engaged Liquid Propane LP Tanks Safe handling tips for LP GasInspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceReplacing Main Burners General MaintenanceWeber Spider Stopper Guards Main Burner Flame PatternView from behind cooking box Wing nuts Crossover Ignition System Operations FlameCheck Safety System Resembles paint peeling When burner is on HIGH. Flames do not runBurner does not light, or flame is low in High position Burner flame pattern is erratic. Flame is lowFlame is low in High position Side Burner TroubleshootingSide Burner Maintenance Problem Check Cure Side burner does not light18-19 21-22 Parts List Final Word Thanks