Weber 4000 owner manual Secure side burner, Complete accessory installation

Step 26

Secure side burner

Pull the right hand swing table up. Stand to the right side of the barbecue. Slightly pull back both side burner locks. Slide the side burner toward the control panel. The locks will snap into the slots in the front and back of the side burner. Figure 40.

Caution: Make sure both locks have snapped into place.

Step 27

Complete accessory installation

You will need: work table, two accessory trays, serving tray, Warm-Up Basket, warming rack, thermometer, two tubing plugs and a hammer.

Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 41 (a).

Set the work table onto the left side rails. Figure 41 (b).

Place porcelain serving tray on the work table. Figure 41 (c).

Set the accessory trays between the two frame connectors. Figure 41 (d).

Set the warming rack into the slots at the rear of the cooking box. Figure 41 (e).

Insert the thermometer into its holder. Figure 41 (f).

Insert tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 41 (g).

View from top

(a)

(e)(f)

(c)

(b)

Side view

Figure 40

(g)

(d)

Figure 41

Caution: To keep the barbecue stationary, the tabs on the locking casters should be in the down position.

26