Suburban Mfg 12155-00-FNFNAA, 12155-00-FNHJAA manual Nebulizer Hose Barb Fitting, Tools Required

Owner’s Manual - Oxygen Therapy Door

Nebulizer Hose Barb Fitting

P/N 854546

Tools Required

„5/8 in. open-end wrench

„Utilityknife

Procedure

The hose barb fitting connects the oxygen supply hose to the nebulizer (Figure 21). To replace the fitting:

1.Pull or cut the oxygen supply hose off the fitting.

2.Hold the white, 4-arm knob on top of the regulator, and unscrew the barb fitting with a 5/8 in. open-end wrench.

Barb Fitting

5/8 in. Hex

Oxygen

Supply Hose

4-arm Knob

Figure 21. Nebulizer Barb Fitting

3.To install the new fitting, hold the knob and tighten the new fitting with the wrench.

4.Push the oxygen supply hose onto the new fitting. Note:A small amount of grease on the barbs will ease assembly.

Form No. 702703 Rev. E August, 2006 21