Suburban Mfg 12155-00-EPHJAA Nebulizer Extension Nebulizer Cotter Pin Gauge Assembly, Overview

Chapter 4 - Repairs and Replacements

Nebulizer Extension

P/N 754061

Nebulizer Cotter Pin

P/N 853071

Gauge Assembly

P/N 854117

The nebulizer extension is a 2 in. long stainless steel tube that provides a channel for the oxygen from the nebulizer to the interior of the therapy chamber (Figure 18). To mount a new extension to a new nebulizer cap, use a high quality silicone cement. Make sure the finished joint is secure and free of air leaks.

The cotter pin holds the nebulizer to the oxygen therapy door (Figure 18). If you should lose or damage this pin, we recommend that you obtain a replacement locally to save time and expense. The pin is stainless steel, 1/16 in. diameter, and 1.5 in. long. In an emergency, use a bent paper clip as a temporary replacement!

Overview

The original gauge was a square, analog-type instrument. This gauge is no longer available, and has been replaced by a smaller, more modern, digital instrument (Figure 24).

Tools Required

„3/8 in. wrench

„Phillips screwdriver

„Small flat-blade screwdriver (for old-style gauge only)

„Electric drill with 1/16 in. bit

Removal - Old-style Gauge

1.Open the cage door.

2.With a Phillips screwdriver and a 3/8 in. wrench, remove the two gauge bracket screws/nuts (Figure 22).

3.With a small flat-blade screwdriver, unscrew the two gauge screws (Figure 23).

Gauge Screws

Gauge Bracket Screws

Gauge

Bracket

Figure 22. Removing the Old-style	Figure 23.	Rear the Old-style Gauge
Gauge Assembly	Assembly

22 SSCI - Suburban Surgical Company, Inc.