Suburban Mfg 12155-00-EPFNAA manual Seal Strip Retainer and Seal Strip, Parts Identification

Page 30

Chapter 4 - Repairs and Replacements

Seal Strip Retainer and Seal Strip

Refer to Tables 3 and 4 for Part Numbers

The following instructions cover both the seal strip retainers and the seal strips. All seal strip retainers are the same except for length and number of mounting holes. The same is true for all seal strips.

Parts Identification

Table 3 on Page 27 and Table 4 on Page 28 give the part numbers for the various seal strip retainers and seal strips.

Note: The dimensions refer to the door/cage size, and not to the actual lengths of the retainers and seals.

Tools Required

3/8 in. box-end or open-end wrench

Phillips screwdriver

Procedure

Note: You do not have to remove the door from the cage to replace a seal strip retainer or a seal strip.

1.Open the oxygen therapy door.

2.With a 3/8 in. wrench and a Phillips screwdriver, remove the mounting nuts and screws (Figures 29 and 30) that hold the seal strip retainer and seal strip to the door.

Note: The number of mounting screws/nuts varies with the dimensions of the door.

Seal Strip

Mounting Screw

Mounting	Seal Strip
Nut

Seal Strip Retainer

Figure 29. Outside View - Seal Strip and	Figure 30. Inside View - Seal Strip
Retainer Mounting Screws	Retainer and Seal Strip

3.Lift off the seal strip retainer.

4.If you are replacing the seal strip, remove it at this time.

26	SSCI - Suburban Surgical Company, Inc.

Image 30

Contents Ssci Page Table of Contents Repairs and Replacements TroubleshootingGeneral Information Introduction About this ManualInformation Safety Notices ModelsModels Oxygen Therapy Door Care and Cleaning of Stainless Steel Introduction Cleaning CleansersSafety Cleaning RequirementsSsci Contact Information Warranty Telephone IllinoisComments Installation and Setup Unpacking Inspection Parts Included Installation SetupTools Required Procedure HingesOn a Regal Cage Disposition of the Shipping Carton NebulizerComments Door and Latch Operating and CleaningOpening and Closing Latch Adjustment Door SealsIce Tray GaugesGeneral Maximum/Minimum Temperature Humidity Recording Replacing the Gauge BatteryChanging Between C and F Displays Using the Nebulizer Gauge Battery Slide and BatteryOxygen Concentration Control Oxygen Concentration ControlCleaning Instructions Nebulizer Cleaning ProceduresIntroduction Repairs and Replacements Replacement PartsReplacement Parts Available for the Oxygen Therapy Door General Information Parts Ordering Procedure Procedures Tool RequiredNebulizer Oxygen Supply Hose Cotter PinNebulizer Hose Barb Fitting Tools RequiredNebulizer Extension Nebulizer Cotter Pin Gauge Assembly OverviewRemoval Old-style Gauge Removal New-style Gauge Front View of the New-style Gauge mounted on doorDrilling Button Access Holes Ice Tray Ice Tray ValveParts Identification Seal Strip Retainer and Seal StripRefer to Tables 3 and 4 for Part Numbers Retainer Mounting Screws Retainer and Seal StripDoor Model Door Dimensions Seal Strip Retainer Quantity Seal Strip Retainer Part NumbersDoor Model Door Dimensions Seal Strip P/N Quantity Seal Strip Part NumbersTroubleshooting GeneralReturning the Oxygen Therapy Door for Repairs RMA Numbers Packing and ShipmentThere is no oxygen flow into the cage Remedial ActionThere is excessive oxygen leakage from the cage Door does not close or latch correctly One or both of the gauges does not read correctly Inside back cover This page left blank intentionally Suburban Surgical Company, Inc Twelfth Street Wheeling, IL Phone 847Toll Free 800