How to Fill the Medication Bottle
Have you removed Mask Adapter and the supplied Mouthpiece?
(For how to assemble the Main Unit, refer to Page 8)
of the Unit How to Fill the Medication Bottle
1Remove Medication Bottle from the Main Unit.
2Open the Mesh Cap.
Hold the medication bottle as if covering it with your hand.
Do not open the bottle cap.
Press gray tabs on both side of Medication Bottle at the same time lift upwards.
Lift up the mesh cap while pressing your thumb hard on the brim.
Correct Use
3Fill Medication Bottle.
Be careful to prevent the Mesh Cap from closing as shown in the Figure.
– The maximum capacity of Medication Bottle is 7 ml.
4Close the mesh cap.
–Be sure to check that the Mesh Cap is engaged. If it is not engaged, medication will leak.
Check that the Mesh Cap is closed.
12