3.After all symbols disappear, the display will show “00”. The monitor is “Ready to Measure” and will automatically inflate the
cuff to start measurement.
4.Once your systolic pressure is determined, the monitor will begin deflating to measure your diastolic pressure.
Note: This monitor will
5. When the measurement is completed, the cuff will deflate entirely. Systolic pressure, diastolic pressure and pulse will be shown simultaneously on the LCD screen.
The measurement is then automatically stored into memory.
Note:
1.This monitor automatically turns off approximately 1 minute after last operation. You may also press the START/STOP button to turn the unit off.
2.To interrupt the measurement, you may press the
START/STOP (recommended), “MEMORY,” User- Select or Date & Time Set ( 
) buttons. The cuff will deflate immediately after a button is pressed.
RISK CATEGORY INDICATOR
The U.S. Department of Health and Human Services and the National Institutes of Health have developed a blood pressure standard classifying blood pressure ranges into 4 stages. This unit is equipped with an innovative blood pressure classifi- cation indicator, which visually indicates the assumed risk level (normal, prehypertension, stage 1 hyperten- sion, or stage 2 hypertension) of each reading. Symbols are described below and classifications fol- low the guidelines as described earlier in this manual (page 5).
(No Symbol)
19 | 20 |