INSTALLING BATTERIES
1.Press down on latch and lift the battery cover to open the battery compartment.
2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.
3.Close the battery cover by pushing in the top end
of the battery door.
Battery
Cover
Replace the batteries if:
1.The weak battery symbol appears on the display.
2.Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be discharged earlier than batteries you buy in stores. Replace the batteries in pairs. Use only 1.5V AA alkaline batteries. Remove batteries when unit is not in use for extended periods of time. Date and time will need to be reset if batteries are removed or replaced. Note: Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
USING THE AC ADAPTER
Note: • Please unload the batteries when operating with an AC adapter for an extended period of time. Leaving the batteries in the compart- ment for a long time may cause leakage, which may lead to damage of the unit.
•No batteries are needed when operating with an AC adapter.
•Date and time will need to be reset if AC adapter is unplugged.
1.Connect the AC adapter with the AC adapter jack in the back of the unit as shown below.
2.Please use only the AC adapter included with this monitor.
AC Adapter
Input:
Output: 6V DC 500mA 3 W Max
Connect AC adapter here
11 | 12 |