ABOUT MEMORY
This monitor automatically stores up to sixty (60) blood pressure and pulse measurements in memory. Measurements stored in memory are assigned an index number in the order of the newest to the oldest.
The oldest reading displays as “n01”. The M symbol in the upper left corner of the display screen indicates that you are viewing a previous measurement stored in memory.
To retrieve readings, follow these simple steps:
1.. When the display screen is blank, press and quickly release the Memory button. You will see the index
number of the most recent blood pressure that was taken followed by the measurement.
2.. If you want to retrieve other measurements in memory, press and release the Memory button repeatedly until the desired index number is
reached (e.g. n04). The measurement will then be displayed.
3.. The display will shut off automatically a few seconds after the readings are displayed.
If there are no measurements stored in memory, you will see two 0s displayed vertically followed by a blinking “A00”.
To clear the measurement history from memory, press and hold the Memory button for at least five seconds while the display screen is showing blank. Release the Memory button when you see the M symbol in upper left hand corner of the display flash and disappears. This indicates that the memory has been cleared.
NOTE: Stored measurements, will be lost if batteries become low or are removed.
LifeSource Health Line |