A&D TM-2655P manual Installation, Proper installation

Page 16

3. INSTALLATION

Follow the procedure below to install the TM-2655/TM-2655P.

1.To ensure that the TM-2655/TM-2655P works properly, install the device in an environment where:

The temperature range is from 10°C to 40°C (50°F to 104°F).

The humidity is less than 85% (non condensing).

It is away from water, dust, chemicals, and corrosive or explosive gases.

It is not exposed to direct sunlight.

2.Place the TM-2655/TM-2655P on a table solid enough to support its weight.

3.Adjust the height of the chair and table so that the arm insertion section is at the user’s heart level.

Fig.4 Proper installation

4.Use the power cable provided with the device to connect between the AC INPUT connector and an electrical outlet.

Using the anti-theft opening, secure the device to the table with a solid chain.

Fig.5 Power cable connection

Note

Be sure to use the correct voltage for the power source.

8

Image 16

Contents Automatic Blood Pressure Monitor Page Important information that helps users operate the device Compliance Compliance with the Australian EMC Frame WorkSafety Precautions GroundingGeneral Precautions When installing and storing the deviceMust be disposed of according to the applicable regulations Page Contents Troubleshooting External Dimensions Features IntroductionUnpacking and Inspection Items containedSpecifications Performance specificationsPart Names Main UnitSymbols Rear PanelInstallation Proper installationOperation Be sure to insert your arm to the shoulderMeasurement results Clock Adjustment Mode Setting the ClockSetting Example Page Installing the Printer Paper Paper installation procedureSetting the Functions Function Setting ModeDescription of the Functions F02 OffPrinting Samples Line printing Table printing Bit pattern printingCommunication Specifications Channel 1 Miniature DIN 8-pinCable connection diagram Channel 2 D-sub 9-pinMaintenance Replacing the Arm Cuff CoverReplacing the Fuses Error CodesChecking the Counter Maintenance CleaningOptions and Consumables Troubleshooting External Dimensions External dimensions