A&D TM-2655P manual Compliance with the Australian EMC Frame Work

Page 4

COMPLIANCE

Compliance with the European Directive 93/42/EEC for Medical Products

This device conforms to the following requirements: European Directive 93/42/EEC for Medical Products act; Medical Products Act; European Standards for Electrical Equipment EN 60601-1 (General Safety Provisions), EN 60601-1-2 and EN 55011 (Electromagnetic Compatibility); European Standards pertaining to Non Invasive Blood Pressure Instruments EN 1060-1(General Requirements), EN 1060-3 (Supplementary Requirements for Electromechanical Blood Pressure Measuring Systems).

This is evidenced by the CE mark of conformity accompanied by the reference number of a designated authority.

This device was designed for use by adults only.

Compliance with the Australian EMC Frame Work

This device conforms to the following requirements: EMC Emission Standard for Industrial, Scientific and Medical Equipment AS/NZS 2064-1997, EMC Generic Immunity standard AS/NZS 4252.1-1994. This is evidenced by the C-Tick label.

Environment for use

The device is for use in offices, sports facilities, and hospitals (waiting rooms), etc.

NOTE

This device does not have the function of automatic cycling measurement.

Therefore, a part of this device does not conform to IEC60601-2-30.

ii

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Automatic Blood Pressure Monitor Page Important information that helps users operate the device Compliance Compliance with the Australian EMC Frame WorkSafety Precautions GroundingGeneral Precautions When installing and storing the deviceMust be disposed of according to the applicable regulations Page Contents Troubleshooting External Dimensions Features IntroductionUnpacking and Inspection Items containedSpecifications Performance specificationsPart Names Main UnitSymbols Rear PanelInstallation Proper installationOperation Be sure to insert your arm to the shoulderMeasurement results Clock Adjustment Mode Setting the ClockSetting Example Page Installing the Printer Paper Paper installation procedureSetting the Functions Function Setting ModeDescription of the Functions F02 OffPrinting Samples Line printing Table printing Bit pattern printingCommunication Specifications Channel 1 Miniature DIN 8-pinCable connection diagram Channel 2 D-sub 9-pinMaintenance Replacing the Arm Cuff CoverReplacing the Fuses Error CodesChecking the Counter Maintenance CleaningOptions and Consumables Troubleshooting External Dimensions External dimensions
Top Page Image Contents