A&D TM-2655P manual Measurement results

Page 18

8. When the measurement is complete, the air is automatically released from the cuff and the cuff will become loose.

9. The measurement results appear in the display.

10.(TM-2655P) The measurement results are output to the printer.

Fig.9 Measurement results

Note

zTo stop the measurement at any time, press the START/STOP switch. The quick exhaust will reduce the pressure in the cuff and the cuff will become loose.

zIf the air is not exhausted even when the START/STOP switch is pressed, press the EMERGENCY STOP switch.

zIf your arm can not be removed from the cuff due to the power failure, press the safety lever located on the front lower part of the device. It disconnects the clutch to loosen the cuff.

zPlease wait for about 10 minutes before repeating the measurement.

10

Image 18

Contents Automatic Blood Pressure Monitor Page Important information that helps users operate the device Compliance Compliance with the Australian EMC Frame WorkSafety Precautions GroundingGeneral Precautions When installing and storing the deviceMust be disposed of according to the applicable regulations Page Contents Troubleshooting External Dimensions Features IntroductionUnpacking and Inspection Items containedSpecifications Performance specificationsPart Names Main UnitSymbols Rear PanelInstallation Proper installationOperation Be sure to insert your arm to the shoulderMeasurement results Setting the Clock Clock Adjustment ModeSetting Example Page Installing the Printer Paper Paper installation procedureSetting the Functions Function Setting ModeDescription of the Functions F02 OffPrinting Samples Line printing Table printing Bit pattern printingCommunication Specifications Channel 1 Miniature DIN 8-pinCable connection diagram Channel 2 D-sub 9-pinMaintenance Replacing the Arm Cuff CoverError Codes Replacing the FusesChecking the Counter Maintenance CleaningOptions and Consumables Troubleshooting External Dimensions External dimensions