Schwinn 250 schwinn manual Condition/Problem Things to Check Solution

Condition/Problem	Things to Check	Solution
Console shuts off (enters	Check electrical (wall)	Make sure unit is plugged into a func-
sleep mode) while in use	outlet	tioning wall outlet.
	Check connection at front	Connection should be secure and un-
	of unit	damaged. Replace adapter or connec-
		tion at unit if either are damaged.
	Check data cable integrity	All wires in the cable should be intact. If
		any are cut or crimped, replace cable.
	Check data cable	Be sure cable is connected securely
	connections/orientation	and oriented properly. Small latch on
		connector should line up and snap into
		place.
	Reset machine	Unplug unit from electrical outlet for 3
		minutes. Reconnect to outlet.
	Check magnet position	Magnet should be in place on pulley.
	(requires shroud removal)
	Check Speed Sensor	Contact Customer Care for further
		assistance.
Fan will not turn on or will	Check data cable integrity	All wires in cable should be intact. If any
not turn off		are cut or crimped, replace cable.
	Check data cable	Be sure cable is connected securely
	connections/orientation	and oriented properly. Small latch on
		connector should line up and snap into
		place.
	Reset machine	Unplug unit from electrical outlet for 3
		minutes. Reconnect to outlet.
Fan will not turn on, but	Check for blockage of fan	Unplug unit from electrical outlet for 5
Console operates		minutes. Remove material from fan. If
		necessary, detach the Console to help
		with removal. Replace the Console if
		unable to remove blockage.

48