OPTIONS | SECTION 11 | |
|
|
|
INSTALLING THE CRUTCH AND CANE CARRIER (FIGURE 3)
WARNING
Check base weekly to secure proper placement.
Strap must be securely fastened while carrying items.
Never insert or remove items while wheelchair is moving.
1.Slide the clamp with the base attached over the end of the step tube of the wheelchair.
2.Position the base parallel to the step tube.
CAUTION
Base should be parallel to step tube to avoid bending spokes when folding the wheelchair.
3.Securely tighten the locknut that secures the base to the step tube of the wheelchair.
4.Remove the upper back upholstery screw and washer.
5.Align the strap with the back upholstery screw mounting hole.
6.Reinstall the back upholstery screw and washer and secure the strap to the wheelchair.
7.The base cleans easily with any chrome or glass cleaner. The strap can be cleaned with mild soap and water.
Strap
Base
Step
TubeClamp
Locknut
FIGURE 3 - INSTALLING THE CRUTCH AND CANE CARRIER
OPTIONS
Part No. 1110550 | 53 | Tracer® SX5 |