SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Inspect/Adjust Weekly
❑Seat is secured to wheelchair frame.
❑Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑Seat release latch is not worn and is functional. Replace if necessary.
❑Inspect tires for flat spots and wear.
❑Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑Ensure casters are free of debris.
Inspect/Adjust Monthly
❑Ensure wheel mounting nuts are secure on drive wheels.
❑Ensure no excessive side movement or binding occurs when drive wheels are lifted and spun when disengaged (freewheeling).
❑Inspect caster assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Inspect for any loose hardware on the wheelchair.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Ensure casters are free of debris.
Inspect/Adjust Periodically
❑Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑Ensure arms are secure but easy to release and adjustment levers engage properly.
❑Ensure adjustable height arms operate and lock securely.
❑Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑Ensure armrest pads sit flush against arm.
❑Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑Ensure seat release latch is not worn. Replace if necessary.
❑Clean upholstery and armrests.
❑Inspect charger AC power cord for damage. Replace if necessary.
❑Ensure casters are free of debris.
❑Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑Check that all labels are present and legible. Replace if necessary.
Pronto® M51™and M61™with SureStep® | 24 | Part No 1125085 |