Invacare Pronto M61 manual Checking Battery Charge Level, Don’T

Page 28

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

Additional Troubleshooting Information for M61 Wheelchairs

SYMPTOM

PROBABLE CAUSE

SOLUTIONS

 

 

 

Wheelchair slows or stops

Elevating seat is elevated.

Return seat to its lowest position. Refer to

while driving and the Seat

 

Elevating the Seat on page 31.

Function 1 indicator is lit.

 

 

 

 

 

Checking Battery Charge Level

The following “Do’s” and “Don’ts” are provided for your convenience and safety.

DO

DON’T

 

 

Read and understand this manual and any service

Don’t perform any installation or maintenance without

information that accompanies a battery and charger

first reading this manual.

before operating the wheelchair.

 

 

 

Move the wheelchair to a work area before opening

Don’t perform installation or maintenance of batteries

battery box or installing service batteries.

in an area that could be damaged by battery spills.

 

 

Recharge as frequently as possible to maintain a high

Don’t make it a habit to discharge batteries to the

charge level and extend battery life.

lowest level.

 

 

Follow recommendations in this manual when

Don’t use randomly chosen batteries or chargers.

selecting a battery or charger.

 

 

 

Fully charge new batteries before using.

Don’t put new batteries into servcie before charging.

 

 

Use a carrying strap to remove, move or install a

Don’t tip or tilt batteries.

battery.

 

 

 

Push battery clamps on the terminals. Spread clamps

Don’t tap on clamps and terminals with tools.

wider if necessary.

 

 

 

Use ONLY a GEL charger for a GEL battery or

Don’t mismatch your battery and chargers.

“Sealed” battery.

 

 

 

Pronto® M51™and M61™with SureStep®

28

Part No 1125085

Image 28
Contents Pronto M51and M61with SureStep Reference Documents Reference DocumentsDocument Table of Contents Table of Contents Register Your ProductSpecial Notes Special NotesMeaning Special Notes Label Location Label LocationTypical Product Parameters Typical Product ParametersAsba ShippingController Settings/Repair or Service AccessoriesGeneral Guidelines Operation InformationImmediately M61 Wheelchairs Only BatteriesCharging Batteries Weight Training Weight LimitationGrounding Instructions Rain TestEMI Information EMI InformationEMI Information SAFETY/HANDLING of Wheelchairs SAFETY/HANDLING of WheelchairsStability and Balance Coping With Everyday Obstacles Coping With Everyday ObstaclesPinch Points Pinch PointsLifting/Stairways Transferring To and From Other Seats Lifting/StairwaysReaching, Leaning and Bending Forward Transferring To and From Other SeatsReaching and Bending Backward Reaching and Bending BackwardSafety INSPECTION/ Troubleshooting Safety Inspection ChecklistsSafety INSPECTION/TROUBLESHOOTING All WheelchairsInspect/Adjust Weekly Symptom Probable Cause Solutions Troubleshooting GuideAdditional Requirements for M61 Wheelchairs About Joystick Diagnostics Display Description DefinitionService Indicator Light Diagnostics Possible SolutionAdditional Troubleshooting Information for M61 Wheelchairs Checking Battery Charge LevelDON’T Turning the Power On/Off Using the Joystick to Drive the WheelchairWheelchair Operation Operating the WheelchairAdjusting the Speed Movement ActionUsing the Horn Elevating the SeatElevating the Seat SPJ+ and SPJ+ w/ACC Joystick Switches and Indicators LEDMode Button On/Off ButtonSpeedometer Speed Control ButtonsService Indicator JoystickCharger/Programming Input Information Gauge DisplayRemoving/Installing the Arms Adjusting the ArmsAdjusting Width ArmsAdjusting Angle Adjusting HeightInstalling Installing/Removing Flip Back ArmrestsRemoving Positioning Flip Back Armrests for User Transfer Positioning/Adjusting Flip Back ArmrestsPositioning Flip Back Armrests for Use Adjusting the Back Angle SeatSemi-Recline Back Angle Fold Down Back AngleAdjusting the Headrest Semi-Recline Only Adjusting the Back Angle Fold Down Back AngleRemoving/Installing the Seat Assembly Removing/Installing the Seat AssemblyReplacing the Seat Positioning Strap Van SeatAsba Seat Replacing the Seat Positioning Strap Asba SeatRemoving/Installing the Footboard Assembly Footboard AssemblyFootboard Assembly Adjusting the Footboard Assembly AngleAdjusting the Footboard Assembly Angle DepthFront Riggings Installing/Removing Front RiggingsFront Riggings Adjusting Footrest Height Model PHWH93Replacing Heel Loops Model PH904A and PHAL4ARaising/Lowering Elevating Front Riggings Adjusting/Replacing Telescoping Front Rigging SupportsOffice Style Seat Inch OUT Inches OUT Front RiggingPosition Standard Seat Inner Mounting Holes Mounting Screws Spacer Removing/Installing the Top Shroud TOP Shroud and WheelsReplacing the Flat Free Tires on the Wheel Rim TOP Shroud and WheelsEngaging/Disengaging Motor Release Lever TOP Shroud and WheelsReplacing Front/Rear Caster Assemblies Engaging/Disengaging Motor Release LeverAdjusting Forks Adjusting ForksBatteries BatteriesUsing the Proper Batteries Removing/Installing Batteries from/into Battery TrayBatteries Tool QTY Connecting/Disconnecting Battery Cables Connecting Battery CablesBatteries Caps not shown on front Disconnecting Battery Cables Charging BatteriesBattery Charger Operation On-Board Battery Charger ON/OFF Indicator Port Electronics Removing/Installing the JoystickElectronics Removing/Installing the Joystick Repositioning the JoystickRepositioning the Joystick Disconnecting Disconnecting/Connecting the JoystickConnecting Disconnecting/Connecting the Joystick Installing/Removing the Crutch/Cane Holder AccessoriesAccessories Installing/Removing the Oxygen Holder CylinderInstalling/Removing the Walker Holder Installing/Removing/Using the Walker HolderUsing the Walker Holder Global Limited Warranty Excluding Canada Global Limited Warranty Excluding CanadaCanada Limited Warranty USA