Invacare Pronto M61 manual Repositioning the Joystick, Removing/Installing the Joystick

SECTION 12—ELECTRONICS

Office Style Seat

	Joystick
Mounting Bracket and	Joystick
Adjustment Lock Lever	Mounting
	Tube

Standard
Arm		Mounting
		Screws
DETAIL “A” - TIE-WRAP	Standard
LOCATIONS
	Arm	Tie-Wrap Here
Office Style Seat		Joystick

Tie-Wrap Here

Joystick Cable

FIGURE 12.1 Removing/Installing the Joystick

Repositioning the Joystick

Van Seat

NOTE: For this procedure, refer to FIGURE 12.2 on page 73.

NOTE: Take note of position and orientation of mounting hardware for reinstalling the joystick assembly.

1.Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.

2.Remove the joystick from the wheelchair.

3.Remove the three hex mounting screws, spacers and locknuts that secure the mounting bracket to the three mounting holes on the arm frame.

NOTE: The mounting bracket is mounted to the inside of the arm frame. 4. Reposition the mounting bracket on the opposite arm frame.

Pronto® M51™and M61™with SureStep® 72 Part No 1125085