Invacare Pronto M61 manual Removing/Installing the Footboard Assembly

SECTION 8—FOOTBOARD ASSEMBLY

SECTION 8—FOOTBOARD

ASSEMBLY

WARNING

After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.

DO NOT stand on the flip-up footboard. When getting in or out of the wheelchair, make sure that the flip-up footboard is in the upward position.

Limited Clearance Between Footboard and Caster - The user’s feet MUST remain on the footboard while operating the chair. If the user’s feet are allowed to rest off the side of the footboard they may come in contact with the caster possibly result- ing in injury.

Removing/Installing the Footboard Assembly

WARNING

Pinch point may occur when rotating the footboard assembly.

NOTE: For this procedure, refer to FIGURE 8.1 on page 46.

Removing

1.Remove the quick release pin that secures the footboard assembly to the wheelchair frame by depressing the button while sliding the pin out.

2.Remove the footboard assembly from the wheelchair frame.

Part No 1125085 45 Pronto® M51™and M61™with SureStep®