Invacare R2-250, Pronto R2 manual General Guidelines

Page 7

GENERAL GUIDELINES

PROCEDURE 1

WARNING

There are a number of sources of relatively intense electromagnetic fields in the everyday environ- ment. Some of these sources are obvious and easy to avoid. Others are not apparent and exposure is unavoidable. However, we believe that by following the warnings listed below, your risk to EMI will be minimized.

The sources of radiated EMI can be broadly classified into three types:

1)Hand-held Portable transceivers (transmitters-receivers with the antenna mounted directly on the transmitting unit. Examples include: citizens band (CB) radios, "walkie talkie", security, fire and police transceivers, cellular telephones, and other personal communication devices. **NOTE: Some cellular telephones and similar devices transmit signals while they are ON, even when not being used;

2)Medium-range mobile transceivers, such as those used in police cars, fire trucks, ambulances, and taxis. These usually have the antenna mounted on the outside of the vehicle; and

3)Long-range transmitters and transceivers, such as commercial broadcast transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.

NOTE: Other types of hand-held devices, such as cordless phones, laptop computers, AM/FM radios, TV sets, CD players, cassette players, and small appliances, such as electric shavers and hair dryers, so far as we know, are not likely to cause EMI problems to your powered wheelchair.

Powered Wheelchair Electromagnetic Interference (EMI)

Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fields from hand-held radio wave sources (transceivers) are of special concern. It is possible to unintentionally bring high levels of EM energy very close to the powered wheelchair's con- trol system while using these devices. This can affect powered wheelchair movement and braking. Therefore, the warnings listed below are recommended to prevent possible interference with the con- trol system of the powered wheelchair.

Electromagnetic interference (EMI) from sources such as radio and TV stations, amateur radio (HAM) transmitters,two-wayradios,andcellularphonescanaffectpoweredwheelchairsandmotorizedscoot- ers. Following the warnings listed below should reduce the chance of unintended brake release or powered wheelchair movement which could result in serious injury.

1)Do not operate hand-held transceivers (transmitters receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as cellular phones, while the powered wheel- chair is turned ON;

2)Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them;

3)If unintended movement or brake release occurs, turn the powered wheelchair OFF as soon as it is safe;

4)Be aware that adding accessories or components, or modifying the powered wheelchair, may make it more susceptible to EMI (Note: There is no easy way to evaluate their effect on the overall immunity of the powered wheelchair); and

5)Report all incidents of unintended movement or brake release to the powered wheelchair manu- facturer, and note whether there is a source of EMI nearby.

Important Information

1)20 volts per meter (V/m) is a generally achievable and useful immunity level against EMI (as of May 1994) (the higher the level, the greater the protection);

2)The controllers for this application have unknown immunity levels.

Modification of any kind to the electronics of this wheelchair as manufactured by Invacare may ad- versely affect the RFI immunity levels.

G E N E R A L

G U I D E L I N E S

7

Image 7
Contents ProntoR2/Pronto R2-250 Series Wheelchair TIE-DOWN Restraints and Seat Positioning Straps R N I N GTable of Contents Performance Specification SWeight limitation varies with motor. Refer to Rain and operators weightGeneral Guidelines ProcedureGeneral Guidelines ProcedureGeneral Guidelines Remove the occupant from the wheelchair SAFETY/HANDLING WheelchairsStability and Balance StairwaysReaching, Leaning, Bending and Bending Forward Shift body weight into seat with transferMinimize GAP Distance Functional Reach From a WheelchairReaching, Bending Backward Shipping Insert Battery Box Shipping Insert InstalledShipping Insert Removed Safety INSPECTION/TROUBLESHOOTING Safety Inspection ChecklistSafety INSPECTION/TROUBLESHOOTINGPROCEDURE Troubleshooting MechanicalTroubleshooting Electrical Checking Battery Charge LevelNumber of Floating Balls Using Hydrometer to Check Battery Cells Lead Acid FigureNumber of Floating Balls Will Vary According to Charge O N T INSTALLING/REMOVING Footrests FigureAdjusting Footrest Height Front RiggingsO N T I N G S INSTALLING/REMOVING Elevating Legrests FigureProcedure Front Riggings Replacing Heel Loops FigureReplacing Adjusting CalfpadsAdjusting Raising/Lowering Elevating LegrestsHeight Figure Adjusting Removable FootboardDepth Figure Angle FigureRemoving The Removable Footboard Plate Installing The Removable Footboard PlateRemoving the One Piece Footboard INSTALLING/REMOVING the ONE Piece Footboard FigureAdjusting the ONE Piece Footboard HEIGHT, ANGLE, and Depth Installing the One Piece FootboardFlat Head Screws Heel Mounting Holes Footboard REMOVING/INSTALLING the CALF-PADS FigureAdjusting the CALF-PADS Adjusting the Calf-Pad Height FigureHub Cap Adjusting the Calf-Pad Width FigureAdjusting the Calf Pad Angle Figure Locknut Caplug WasherRemove the two 2 hub caps from the pivot bracket Adjusting the Calf-Pad DepthCalf-Pad Bracket Locknuts Pivot Calf-Pad Legrest TubeNylon Small WashersO N T I N G Footrest Angle Adjustments Figure M S INSTALLING/REMOVING Flip Back Armrests FigureAdjusting Flip Back Armrests Figure ArmsPositioning Flip Back Armrests for Use Adjusting Captains Seat ArmrestsProcedure Arms Adjust top of the flip back armrest to the desired heightP T a I N S Adjusting Captains Seat FigureReplacing Seat Positioning Strap Captains SEAT/POSITIONING StrapE C Adjustable Seat Back Angle/Recliner Seat Models FigureRepositioning Mkiv Joystick Preparing Mkiv Joystick for USE FigureE C T R O N I C S Fuse Replacement FigureRepositioning Battery Charger Connector Figure ElectronicsRetaining Strap Replacing Battery BOX Retaining Strap FigureT a R a POutside of Wheelchair Front of Wheelchair ENGAGING/DISENGAGINGMOTORS with Clutches Figures 1ENGAGING/DISENGAGING Motors with Motor Locks Figure WheelsAdditional Adjustments for User Preference Detail B Adjusting Forks Figure Adjusting the Stabilizer FigureWheels Shrouds REMOVING/INSTALLING Shrouds FigureR O U D S Recliner Recliner Operation FigureReplacing Back or Headrest Upholstery Figure C L I N E RCane Upholstery Adjusting Back or Headrest Upholstery FigureRecliner Headrest Upholstery ExtensionBatteries T T E R I E SDual U1 Batteries Connecting Battery CablesBatteries Direct Mount MethodConnect Battery Cable to Battery Terminal AS Shown Connect Battery Cables Ring Terminals to This Side PostsInstalling Battery Clamp Covers Black battery clamp cover onto Black bat- tery cableInstall the battery box tops Detail a Connecting Battery Cables to Batteryies TERMINALS/POSTSRED Battery Clamp Cover Negative Battery Terminal/Post Tie-Wrap Group 22NF BatteryMkiv RII Joystick When to Charge Batteries FigureDescription and Use of Battery Chargers Charging Batteries FigureDetail a Required ItemsDetail B Replacing Batteries INSTALLING/REMOVING Battery Boxes FigureRecommended Battery Types Cleaning Battery TerminalsStrap Clip One 1 Connector Battery BoxRear of Chair Retaining FrontR R a N T Y WarrantyUSA