Toshiba EM1-31074EE Speed KEY Setting, Setting Department/Vendor Number, Department Number

11. PROGRAMMING PROCEDURES

11.9 SPEED KEY SETTING

11.9 SPEED KEY SETTING

Normal Mode		ESB Limited Spec. Mode
Menu Group: 1		Item No.: 8
Item No.:	9

The SL-9000 has a maximum of 70x2 speed keys which are very convenient to call PLUs quickly. (Refer to page 5-3 regarding the Key Layout.)

i

<MENU>

Group 1

9

Select the 1st half or the 2nd half of the speed keys.

Enter the Speed

Key number (# 1~70 X 2)

NEXT or

PLU

ENTER

Enter the PLU#.	ENTER
(max. 6 dig.)

Setting Department/Vendor Number

i

PROG.

ESC.

<MENU>

Group 1

Main

<MENU>

<MENU>	9
Group 1
		Enter a default
	AUTO		ENTER
	CODE	department #. (1~99)

Enter the speed

key number.

ENTER	Enter the department #
	or vendor #. (1 ~ 99)
Selecting items to be
assigned to speed keys.
(PLU #/VENDOR #/DEPT #)

ENTER

PROG.

ESC.

<MENU>

Group 1

Main

<MENU>

• Department Number

When initial set #10-6 is set to “1”, the six-digit PLU# is divided into two; the upper two digits are assigned to department #, and the lower four digits to PLU.

The department # is automatically added in front of four-digit PLU# and treated as a six-digit PLU#.

In case of “PROG.”, “Report”, and “Reset” modes, PLU# is treated as a six-digit number. So the upper two digits are not treated as department #. Consequently the four-digit PLU# is available only in “REG.”, “M.DOWM”, and “REWRAP” modes.

NOTE: The default Dept. No. is two-digit serial number ranging from 0 to 99. Entering a “0” clears a Dept. No.

• Vendor Number

Vendor numbers can be set when the Initial Setting #11-1 is set to 1. Vendor numbers are assigned to the speed keys in two ways:

1 Individual vendor number: 00-39

Vendor# is assigned to the speed keys one by one.

2Group vendor number: 0-, 1-, 2- and 3-

Maximum 10 vendor numbers can be assigned to one speed key, resulting in 4 speed keys in total. When assigning group vendor numbers to the speed keys, enter the first digit of the vendor key (0, 1, 2 or 3) plus a bar (-).

Vendor numbers can be called whichever half of the speed keys are selected.

11-17