Toshiba SL-9000-ESB SERIES Transferring Logo Data, Error message during data transmission

Page 54

11. PROGRAMMING PROCEDURES

11.16 TRANSFERRING LOGO DATA

11.16 TRANSFERRING LOGO DATA

In ESB Limited Spec. Mode, this programming is unavailable.

Menu Group: 2

Item No.:8

Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64KB of RAM area is secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can be stored. Before starting the following operation, set the initial setting #10-7 to 1.

<MENU>

Group 2

				Select a transmission item.
8	Load the tape into			1: SAVE(SL-9000	CMT)
8		the CMT Loader		2:VERIFY(SL-9000=CMT)
		the CMT Loader		2:VERIFY(SL-9000=CMT)
				3:LOAD(SL-9000	CMT)
	ENTER	PROG. <MENU>
			Group 2
		ESC.	Main
		ESC.	<MENU>
			<MENU>

NOTE: Two sizes of logos are printed differently as follows:

<Label><Receipt>

320x118-dot size logo

256x64-dot size logo

The logo is printed at the lower	A whole Logo #1 and a half of
center of the print area.	logo #2 area printed.

: Print area for logo

: Logo

Table 6: Error message during data transmission

	Error position
Error message	Cause
	Header text Data text
TIME OUT ERROR	Timeout
	Incorrect segment
	Incorrect logo size
	Incorrect number of logos
DATA ERROR	Incorrect logo number
	Incorrect number of dots to be printed.
	Parity error
	Framing error
	Overrun error

11-28

Image 54

Contents SL-9000-ESB Series Page Safety Summary Meanings of Each SymbolPrecautions Page Page Table of Contents Calling Menu by Entering Password Password SecuritySetting Password and Protect Menu Operating ProceduresIntroduction Accessories Applicable Model9 0 0 0 3 0 M E S B U S Option SpecificationScale CassetteMain Power Switch Drawer I/F AppearanceCMT/PL-3 I/F Display US TypeCA Type QR Type Programming Keyboard Function KEY LayoutProgramming Keyboard Name of Key FunctionDisplays the preceding PLU data Inserts a space when entering charactersSets a block PLU # using the confirmation label procedure Used to set an auto codePrimary function Secondary function Operation Keyboard and Speed KEY BoardOperation Keyboard Function Enters numeric data such as PLU #, unit price and tareDisplays the date Sets the quantity of commodity in by Count modePrints the customer label Selects the item for change Print/OFFIssue. Optional key by initial setting Issues a test labelAdjusts the zero point Calls the PLU frequently usedProcedure Before Operation Nutrition SettingSpeed KEY SET Installation Procedure Remote DisplayInstallation Procedure Level Adjustment Removal and Replacement of Media Removal and Replacement of Media Outline of Operation Menu selectionProgramming Procedures How to access the Programming MenuHow to Select Menu and Item No ESB Limited Specification Enter the PasswordTitle and Contents of Programming Menu How to enter characters TEC Store2nd line TEL Group Unit Price ChangeMenu MainPLU Data Setting MenuQuantity Preset TareT1.000 PLU#Open PLU Data PLU# DEPT#Open PLU Ingredient Message Group MainNutrition Facts Additional Information Area 2~6 ~99999 or 0.0~999.9 Daily Value Max digits Contents of daily value Set the Daily Value TableMemory file is sorted when a memory full error occurs Deleting Nutrition DataMemory file sort PLU Verifying Label GroupAddress Setting Special Information Grade LineDepartment Number Speed KEY SettingSetting Department/Vendor Number Vendor NumberPrint Format By pressing KeyLabel Format Number Table 22/38POS DATE/TIME Setting Normal Mode ESB Limited Spec. Mode Menu Group Item NoSave Error code during PL-3 operationPL-3 Operation Key of the PL-3, then check whether the Save LED is onTransmission Item List Operable InoperableClear Transmission Delay Time Table ON-LINE/LOCALBAR Code Format ExampleUPC # Flag PLU # UPC# PC/D Price Weight C C C CUPC# PC/D Title No Format Additional 221 Enter the title # See NoteEnter the title. See Note Additional 231 232Error message during data transmission Time OUT ErrorTransferring Logo Data Idiom Setting Vendor SettingDeleting a vendor number Free Format Key functionsEnter 11-31 C D B aAvailable format and print items for free format For PRTPassword Security Setting Password and Protect Menu13-2 Calling Menu by Entering Password REGOperating Procedures How to access the REG., M.DOWN, or Rewrap menuWeighing Operation Sample labelFIX Price Operation for US Type only By Count Operation Sample label for US type Sample label for CA and QR type14-5 Print Count Operation Example B When operating in Fix or By Count mode From the platter Labels are being issuedPLU Pre=1Issuing Labels with NET Weight Statement for US Type only For14-10 TARE/SAVE Function Procedures Remove the commodity Together with the containerWeight Unit Price Calling and Printing Grade LinesCalling and Printing Logos Or CSelecting Print Item and Adjusting the LCD Brightness Menu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by CountDate Change FeedPRT Batch Print Mode with 30 Items Run Assignment Changing a Unit Price and Calling G.Line/LOGO Stopping or Canceling Label Issue Preset CountVoid Floating Vendor Subtotal Receipt will be issuedPrice deletion Enter vendor #READ5 RESET6 How to access the Read or Reset menuReset Total OperationHourly Total Report Grand Total ReportPLU Total Report Block Total Ex. UPC Block Total UPC #100100~100199 Vendor Total ReportIndividual Total Ex. Individual PLU Total PLU #100 Zone Total Ex. PLU Zone Total PLU #100~107Error Message Table Programming ModeMessage Cause Solution Label Issue Mode Read and Reset ModeMitting Data CMT Operation ModeMismatch Spec BAD Tape or CMTCleaning the Print Head Clearance 0.5~0.8 mm Label Cutter Peel-off PlateProblems Solution TroubleshootingBefore You Call for Service SuppliedPage