Toshiba EM1-31074 DATE/TIME Setting, Normal Mode ESB Limited Spec. Mode Menu Group Item No

11. PROGRAMMING PROCEDURES

11.11 DATE/TIME SETTING

11.11 DATE/TIME SETTING

Normal Mode		ESB Limited Spec. Mode
Menu Group: 2		Item No.: 4
Item No.:	1

Date, time, machine number, and store code are set in this procedure.

<MENU>

Group 2

k

1

Set the date.	ENTER
(Month, Day, Year)

Set the time.

(Hour, Minute)

ENTER

Set the machine No.	ENTER	Set the store No.	ENTER
(max. 6 dig.)		(max. 5 dig.)

NOTES:

1. Express the time in a 24-hour military format.

k

PROG.

ESC.

<MENU>

Group 2

Main

<MENU>

2. The SL-9000 will check details of date (time) input, and any wrong date (time) will result in an error. Then the correct date (time) should be re-entered and press the CLEAR key.

3.Even when the initial Setting # 8-4, 8-5 or 8-6 is set to the “Julian Date” the way to enter the date in the date setting operation is the same in the ordinary case.

4.The date display method can be changed by the initial setting.

11.12 CMT/PL-3

Normal Mode		ESB Limited Spec. Mode
Menu Group: 2		Item No.: 5
Item No.:	2

CMT OPERATIONS

SL-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the transfer of the entire PLU file, ingredient file and other data from the SL-9000 to tapes. This can be accomplished in number of operation steps.

In turn, information from the tape can also be transferred to another SL-9000 scale.

<MENU>

Group 2

NOTES:

2

Set the transmission items.

(Refer to table 4)

NEXT	or
PLU

ENTER

PROG.

ESC.

<MENU>

Group 2

Main

<MENU>

1. The error mode can be released by pressing the CLEAR key, and operated again through the above steps.

2.Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording.

3.For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.

11-21