Waterpik Technologies WP-480 manual Showerpik Installation Instructions, Do not use your fingers

Page 8

8

Showerpik® Installation Instructions

Installation of Showerpik® Bracket

Do NOT use pipe tape.

1.Remove current fixed mount showerhead or handheld showerhead bracket from shower pipe leaving only the shower pipe. Remove any leftover pipe tape residue. Ensure that the washer from the old shower is not connected to the pipe. Use a thin utensil to check inside the pipe for washer such as a pencil or screw driver.

4.	Thread pivot ball onto shower pipe
	and hand tighten clockwise to a
	snug fit. (4A) Use an adjustable
	wrench or pliers to tighten an
	additional ¼–½ turn. (4B)
	IMPORTANT: Do not over tighten.
5.	Attach the diverter valve by
	hand tightening the large nut

4A

Tighten

4B

Do not use your fingers.

2.Remove large nut from diverter valve and remove pivot ball. NOTE: The large nut and diverter valve have a left handed thread and loosen when the large nut is turned clockwise as viewed from the back of the diverter. (2)

3.Place large nut over shower pipe with threaded end facing you

(narrow end toward wall). (3)

2 Loosen

3

to the threaded back of the

diverter valve. (5)

NOTE: The large nut and diverter

valve have a left handed thread and

tighten when the large nut is turned

clockwise as viewed from the front

of the diverter.

Tighten

5

Tighten

Image 8

Contents Page Table of Contents Important Safeguards FollowingTo reduce the risk of electrocution EnglishKeep charging unit away from heated surfaces Remove any oral jewelry prior to use of this productProduct Description Front BackHose Replacement Charger Water Pik PN Replace Every 3 Months Replace Every 6 MonthsEnglish Do not use your fingers Showerpik Installation InstructionsInstallation of Showerpik Bracket To lock into place a Power handle BHose Attachment to Diverter Valve Re-Installing a Waterpik Hidden Pivot Ball Showerhead Adjusting angle Showerpik Bracket When FinishedGetting Started Preparation and UseTongue Cleaner Tip Pik Pocket TipOrthodontic Tip Toothbrush TipCleaning and Troubleshooting your Waterpik Water Flosser Serial Number Limited Two-Year WarrantyService Maintenance English Índice Español Para reducir el riesgo de electrocuciónMedidas DE Seguridad Importantes Retire cualquier joya oral antes de usar este producto Contactos de metalDescripción DEL Producto Cargador Water Pik PN Reemplazar cada 3 meses Reemplazar cada 6 mesesManguera de repuesto Español Instrucciones de instalación de Showerpik Instalación del soporte ShowerpikParte posterior roscada de la válvula 5 desviadora No use cinta para tubosConector de la manguera a la válvula desviadora De giro para que encaje en su lugar aCabezal de ducha Tuerca grandeCómo ajustar el ángulo del soporte Showerpik Cómo comenzar Cómo cargar la bateríaInserción del receptáculo de la batería Cómo insertar y quitar los cabezalesCómo regular el ajuste de presión Técnica recomendadaCuando haya terminado Cubierta del cabezalCabezal limpiador lingual Cabezal de cepillo de dientesColoque el cabezal de cepillo de Cabezal Plaque SeekerProblemas con el flujo del agua Cómo limpiar y reparar su irrigador bucal de WaterpikFugas Cuidado y limpieza de la válvula desviadoraGarantía limitada de dos años Mantenimiento de servicio¿Todavía tiene preguntas? Número de serieEspañol Water Pik, Inc East Prospect Road Fort Collins, CO 80553-0001 USA