Waterpik Technologies WP-480 manual Hose Attachment to Diverter Valve, To lock into place a

6.Hose Attachment to Diverter Valve:

Locate ridged hose connection end. Line up the notches on the diverter valve with the raised areas inside the hose nut and insert then turn ¼ turn

to lock into place. (6A)

6A

1/4 turn

To Showerpik® Power Handle:
Hand tighten hose end to the hose	6B
	Tighten
inlet on the back of the Showerpik®
power handle. (6B)

7.If showerhead or diverter valve becomes loose during use, re-tighten large nut as described in step 5.

9

8.Attach your fixed mount showerhead or handheld showerhead bracket to the threads of the Showerpik® diverter just as the showerhead had previously been installed on the shower pipe. If you own a fixed mount or handheld showerhead with a Waterpik® hidden pivot ball see reinstallation instructions in next section.

Note: Showerhead attachments may vary from pictures above. ENGLISH