Sonicare e7000 manual Quadpacer\ 30-second interval timer

4235 020 01173 13-01-2006 07:31 Pagina 10

10ENGLISH

BThe Smartimer will automatically reset to the beginning of a 2-minute cycle if:

-brushing is paused for 30 seconds or longer;

-the handle is returned to the charger.

Quadpacer\ 30-second interval timer

1

2

4 3

C ◗ Quadpacer makes sure that you brush all sections of your mouth evenly and thoroughly.When using a two-minute brushing cycle, you will hear a short beep and a pause in brushing action at 30, 60 and 90 second intervals.

Programmable Quadpacer timer (select models only)

The Programmable Quadpacer timer offers you the option of customizing the Quadpacer performance in 1 of 3 ways:

◗You may opt to keep the factory default setting of a 2-minute brushing time with Quadpacer feature activated.

◗You may choose to extend your brushing time to 2 1/2 minutes by adding an additional timing interval of 30 seconds with Quadpacer feature active.

◗You may choose a 2-minute brushing time, but with the Quadpacer feature turned off.

To change the Quadpacer settings:

C

C

1Place the handle in the charger that is plugged into a live electrical outlet.

2Press the Dual Speed Control button briefly and note which LED lights up.

3Press and hold the Dual Speed Control button. Continue to hold the button while the LEDs slowly cycle through the timing interval setting options:

◗Green LED in position 4: Quadpacer active (factory default setting).