A&D GH-120/GH-200/GH-300/GH-202/GH-252 Sample mass error, Unit mass error, Clock battery error

Page 73

Display

Error code

Description

 

 

Sample mass error

 

 

The balance can not store the sample for the counting mode

 

 

or for the percent mode because it is too light.

 

 

Use a larger sample.

 

 

Unit mass error

 

 

The sample unit mass for the counting mode is too light.

 

 

Storing and using it for counting will cause a counting error.

 

 

Add samples to reach the specified number and press the

 

 

PRINT

key. Pressing the PRINT key without adding

 

 

samples will shift the balance to the counting mode. But, for

 

 

accurate counting, be sure to add samples.

 

 

Automatic response adjustment zero error

 

 

The automatic response adjustment can not be performed

 

 

because there is something on the pan. Clear the pan. Press

 

 

the CAL

key to return to the weighing mode.

 

 

Automatic response adjustment unstable error

 

 

The automatic response adjustment can not be performed

 

 

because the mass value is unstable.

(Check NG)

Check the ambient conditions such as breeze, vibration and

magnetic fields, also check the weighing pan.

 

 

 

 

Press the

CAL key to return to the weighing mode.

 

 

Clock battery error

 

 

The clock backup battery has been depleted.

 

 

Press any key and set the time and date. The clock and

 

 

calendar function works normally as long as the AC adapter

 

 

is connected to the balance. If this error appears frequently,

 

 

contact the local A&D dealer.

 

 

Memory full

"f"U"l

(Blinking)

The amount of weighing data in memory has reached the

maximum capacity. Delete data in memory to store new data.

 

 

 

For details, refer to "12. Data Memory".

 

 

Memory full

 

 

The amount of calibration or calibration test data in memory

fU l

(Illuminated)

has reached the maximum capacity (50 sets).

 

The data in memory will be deleted automatically to store new

 

 

 

 

data. For details, refer to "12. Data Memory".

 

 

Memory type error

"C"l"r

 

Type of memory set in the function table and type of data

 

 

stored are different. For details, refer to "12. Data Memory".

 

 

Memory data error

 

 

The stored data were destroyed. To use the memory

 

 

function, erase all the old data and release the error. For

 

 

details, refer to "12.1. Notes on Using Data Memory".

71

Page 72 Page 74
Image 73
Page 72 Page 74
Contents 1WMPD4000891C GH-120 GH-200 GH-300 GH-202 GH-252Page Contents Interface And Communication Underhook Density MeasurementAbout This Manual IntroductionCompliance FeaturesCompliance With FCC Rules Compliance With EMC DirectivesPage Unpacking the Balance Installing the Balance PrecautionsBefore Use Shock During UseAfter Use Power SupplyKey When pressed and released When pressed and held Display Symbols and Key OperationDisplay Key operationUnits Weighing Units101 00001 Changing the Units Counting mode Pcs Percent mode Densitymode Press the PrintExamples Unit Display Gram Balance displaysUnit setting example Basic Operation Gram Mode Precautions for the weighing operationRead . Display symbols and Key operation before operation WeighingWeighing range Available minimum display Dual Range01mg 1mgStoring a sample unit mass Weighing input mode Counting Mode PCSCounting operation Mark turns off after Unit mass is improved Repeat Counting mode using the Acai functionSelecting the percent mode Percent Mode %Storing the 100% reference mass Reading the percentageAutomatic Response Adjustment Response AdjustmentAdvise Key until Manual Response AdjustmentDisplayed, then release the key Press Key again quicklyCalibration Group CalibrationAutomatic Self Calibration Automatic self calibration due to changes in temperatureOne-Touch Calibration MarkPress and hold the CAL Key until is CC Calibration Test Using the Internal MassCalibration Using an External Weight Key................. The key To cancel the operation Calibration Test Using an External WeightKey ..............The key to store the new mass value Even if the AC adapter is removed,Correcting the Internal Mass Value Permit or Inhibit Function Switch and InitializationInitializing the Balance Press the Print key To cancel this operation, pressKey to display Function Table Setting the Function Table Display symbol and keysFunction table is displayed Press Setting procedureKey to select a class Press Key to enter the class Key to select a item PressSetting example Details of the Function Table Int Factory settingsData output Time/Date output ID number outputAK, Error code 5if TimeoutErCd Interface Ct5Description of the Class Environment, Display Key mode Description of the Item Data Output ModeStream mode Auto print modes a and BDescription of the Item Data Format Interval memory modeStandard format DP Dump print formatMT format KF formatNU numerical format Data Unit Terminator Stable value Unstable valueData number CSV formatDate TimeNegative error Space Positive errorData Format Examples Stable Unstable OverloadUnits Clock and Calendar Function Setting the timeOperation Confirming the timeQuitting the operation Setting the dateSet the date Store ID Number and GLP Report Setting the ID NumberGLP Report Calibration report using the internal massKey operation Balance returns to weighing mode after this test Calibration test report using an internal massCommad Calibration report using an external weight When using preset target value, proceed to step Calibration test report using an external weightTitle block Title block and end blockWeighing data Data Memory Returns to the weighing modeReleasing Clr or err Press and hold the Print key until the keyStoring the weighing data Data Memory for Weighing DataMemory full Interval memoryParameter settings for each output mode are as follows Setting the function tableAdditional parameter settings, as follows Enabling the data memory functionTransmitting all memory data at one time Recalling the memory dataDeleting all memory data at one time Storing the calibration and calibration test data Data Memory for Calibration and Calibration TestTransmitting the memory data Deleting data stored in memoryUnderhook Formula to obtain the density Density MeasurementPrior to measurement Changing the function table Density of a liquidEntering the density of a liquid Relation between the water temperature and densityOutput or store Density display Turns off. lights Measuring the densityPress the modes Key to proceed to otherRS-232C Interface Standard Input and Output InterfaceSub 25 pin assignments Connection to an AD-8121B printer Connection to Peripheral EquipmentUsing the WinCT software, the balance can do the following Using Windows Communication Tools Software WinCTConnection to a computer and the use of WinCT RsComCommand List CommandsControl Using CTS and RTS Acknowledge Code and Error CodesSettings Related to RS-232C On command turning on the balance Command ExamplesCommand Re-zeroing the display Error code CAL command Calibration with internal massWeighing with a tare Command ?PT command Net value Tare valuePT command to set a target weight of 10 g Zero display Command ExecutionZero Error Codes MaintenanceTreatment of the Balance Unit mass error Sample mass errorAutomatic response adjustment zero error Automatic response adjustment unstable errorOther Display Checking that the balance performs properly Checking the Balance Performance and EnvironmentAsking for Repair Specifications Unit mm External DimensionsGH-02 USB interface Options and Peripheral EquipmentGH-08 Ethernet Interface AD-8121B PrinterAD-1683 DC Static Eliminator AD-1653 Density Determination KitAX-USB-9P-EX USB Converter 9970 g/cm3AX-T-314A-S External key Plug AX-SW128 Foot switchOther options Terms Terms/IndexIndex 5pd Out Options5tart Tare PU5eMemo Memo
Top Page Image Contents