Pelco C1977M-D manual Live video Off

		Table E. Alarm Settings (Continued)
Configuration	Default	Description
Item	Settings
Live video	off	The auto connect feature guarantees an active connection to
auto connect		the given alarm IP address even after connection break-
		down or network failures. If auto connect is selected, the
		network cable can be pulled any time. As soon as the net-
		work comes back alive, the connection is reinstated. On a
		receiver, this feature is enabled to establish a connection
		to a transmitter automatically.
Send email	off	Alarm conditions can also be documented by e-mail.
		When triggered, an e-mail message with attached JPEG-
		encoded video frame is sent to the given e-mail recipient.
Idle state	open	The output contacts of the built-in relay are configured to
		be either closed or open when the relay is idle.
Operating	bistable	When the default bistable mode is selected, the relay will stay
mode		in the idle or active state for an indefinite period. In the
		monostable operation mode, the relay will automatically
		fall back to the idle state after a predefined period expires.
Relay follows	none	Operation of the relay can also be automated. Selecting any
		entry from the list ties the operation of the relay to the re-
		spective action or condition. A typical application is having
		the relay following the status of the connection; for example,
		to power peripheral equipment or even the camera itself.
Operate relays	n/a	Clicking the button operates the relay. Typical applications
		are opening remote doors or operating lights.

Pelco Manual C1977M-D (6/02) [ 45 ]