1.Connect a PV130 Converter to the
2.Connect the black and white striped wire from the power supply that came with the converter to the converter’s +12 VDC terminal and the solid black wire to the GND terminal.
3.Connect TD(A) on the converter to terminal 7 on the wall block. Connect TD(B) on the converter to terminal 8 on the wall block. Connect RD(A) on the converter to terminal 2 on the wall block. Connect RD(B) on the converter to terminal 1 on the wall block.
4.Connect the 12 VAC power supply to terminals 3 and 4 on the wall block.
5.Connect the wall block to the KBD4000 with an
6.Connect the monitor.
7.Repeat steps 1 and 2 for the transmitter.
8.Connect TD(A) on the converter to terminal 2 on the wall block. Connect TD(B) on the converter to terminal 1 on the wall block. Connect RD(A) on the converter to terminal 7 on the wall block. Connect RD(B) on the converter to terminal 8 on the wall block.
9.Connect the wall block to COM IN on the multiplexer with an
10.Connect MAIN video output from the multiplexer to the transmitter.
Pelco Manual | [ 73 ] |