Pelco C1977M-D manual Controlling The Display

Controlling The Display

The live video control pages include representations of keys that let you control various functions (in addition to showing the camera display). Use the mouse pointer and click the left mouse button to enable options and operate controls on the screen. Click outside the options to disable a radio button or selection button.

Live video pages let you choose the size of the video viewing area. Click either 352x288 (small) or 704x576 (large) in the Resize Video field.

Live video pages also let you record and play back camera views on a PC’s hard drive. Refer to the Record and Play Back the Display on a PC section for details.

On the Spectra and Esprit live video control pages, you can control the following:

•Presets–To program a preset: position the camera, click the Set checkbox, and click a preset number button.

To activate a preset: click a preset number button.

•Patterns–You can program only one pattern through PelcoNet. To program a pattern: click the Set checkbox, then click Start., and use the arrow buttons to position the camera. Click Stop to halt pattern programming.

To operate a pattern: click Start to begin the pattern and Stop to halt.

•Programming Menus–To access the programming menus: click the Set checkbox, and click the 95 button. Use the camera arrow keys to move up/down the menus. Use the open iris icon to open menus and set options. Use the open iris icon in conjunction with the Exit option to move backward through menu layers and to exit programming mode.

NOTE: If you installed Internet Explorer from the PelcoNet Transmission System CD, ActiveX is already installed. Otherwise, you must install ActiveX before you can view the video. Refer to the Instructions For The Network Administrator section.

[ 52 ] Pelco Manual C1977M-D (6/02)